Sale 18%

ชุดไมค์ติดโทรศัพท์ ยี่ห้อ Rode รุ่น SC6L-KIT 2x SmartLav+/SC6-L

ชุดไมโครโฟนติดโทรศัพท์ 2 ตัวพร้อมอุปกรณ์พ่วงต่อ lightning สำหรับ Apple Devices ในชุดประกอบด้วย ไมโครโฟน RODE Smartlav Plus 2 ตัว และสายพ่วงต่อ SC6L แบบ 2 ช่องเสียบไมค์และ 1 ช่องหูฟังโดยมี output เป็นแบบ lightning สำหรับอุปกรณ์ของ Apple เช่น iPhone iPad โดยเฉพาะ

7,200฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม

รายละเอียดเพิ่มเติม

ชุดไมค์ติดโทรศัพท์ ยี่ห้อ Rode รุ่น SC6L-KIT 2x SmartLav /SC6-L

ชุดไมค์ติดโทรศัพท์ ยี่ห้อ Rode รุ่น SC6L-KIT 2x SmartLav /SC6-L ชุดไมโครโฟนติดโทรศัพท์ 2 ตัวพร้อมอุปกรณ์พ่วงต่อ lightning สำหรับ Apple Devices 

ชุดไมค์ติดโทรศัพท์ ยี่ห้อ Rode รุ่น SC6L-KIT 2x SmartLav /SC6-L includes the SC6-L Mobile Interface two smartLav lapel microphones and accessories such as storage pouches mic clips and windshields. The SC6-L interface facilitates the recording of 24-bit / 48 kHz broadcast-quality audio giving you two TRRS inputs for the microphones a 3.5mm headphone jack and a lightning connector for your iOS device. The microphones record two interview subjects at a time and the accessories allow you to affix the mics fight against vocal plosives and store the mics for later use.

With the SC6-L Mobile Interview Kit you’ll have everything you need to record audio from two interview subjects straight into your iOS device doing so at broadcast quality.

SC6-L Mobile Interface for iOS Devices

The RODE SC6-L is an interface designed to record two-person interviews directly to your iOS device. The interface accepts the inputs of the RODE smartLav microphone multiple types of RODE VideoMics (in conjunction with TRRS adapters) and third-party microphones with the appropriate TRRS connection points.

At one end of the SC6-L you’ll find two 3.5mm TRRS jacks. These are for your microphones. Between the two TRRS jacks is a 3.5mm headphone output for monitoring the incoming signal. At the other end of the interface you’ll see the lightning connector which routes digital signal into your iOS device.

The SC6-L facilitates audio recording at resolutions of 24-bit and sample rates of up to 48 kHz making it a broadcast-quality unit.

The SC6-L works with the RODE Reporter App. This app allows you to change preamp gain and switch between record modes. You can also turn direct monitoring on or off from the app. Other apps work with the SC6-L such as the onboard Camera app GarageBand Voice Memos and others. The SC6-L is compatible with devices sporting iOS 11 and later.

Features

  • 2 x 3.5mm TRRS microphone inputs
  • 1 x 3.5mm headphone output
  • Pairs with RODE Reporter App
  • App controls record mode direct monitoring and mic-pre gain
  • Device works with built-in video/audio capturing apps

ดูสินค้ายี่ห้อ Rode ทั้งหมด

ดูสินค้าอุปกรณ์กล้องเเละมือถือทั้งหมด

สเปคสินค้า

Specifications

SC6-L Mobile Interface for iOS Devices

Frequency Range 20 Hz to 20 kHz
Connections 2 x 3.5 mm TRRS microphone inputs
1 x 3.5 mm headphone output
1 x Lightning connector
I/O 2×2 simultaneous
Bit Depth 24-bit
Sample Rates 44.1 / 48 kHz
Power Bus-powered
Material PC and ABS plastic
Dimensions 0.8 x 1.6 x 0.4″ / 20.2 x 40.0 x 11.0 mm
Weight 0.6 oz / 16.0 g
Packaging Info
Box Dimensions (LxWxH) 6.8 x 3.4 x 0.9″

smartLav Lavalier Condenser Microphone

Acoustic Principle Pressure gradient
Active Electronics JFET
Capsule 0.10″ / 2.54 mm
Polar Pattern Omnidirectional
Address Type End
Frequency Range 60 Hz to 18 kHz
Output Impedance 3 kOhms Typical
Signal to Noise Ratio 67 dB
Maximum SPL 110 dB SPL (@ 1 kHz 1% THD into 1 kOhm load)
Maximum Output Level 189.0 dBu (@ 1 kHz 1% THD into 1 kOhm load)
Sensitivity -35 dB (17.8 mV @ 94 dB SPL)
Equivalent Noise Level 27 dB-A
Connector TRRS
Maximum Output 189 mV
Dynamic Range 83 dB typical
Dimensions 46.5 x 0.18 x 0.18″ / 1180 x 4.5 x 4.5 mm mic and cable
Weight 0.211 oz / 6.00 g
Packaging Info
Box Dimensions (LxWxH) 5.354 x 3.307 x 0.787″

ดาวน์โหลด

↓RODE SC6-L DATA SHEET

↓RODE SMARTLAV DATA SHEET

Login