KLIPSCH R-600F |
|
FREQUENCY RESPONSE |
38Hz – 21kHz +/- 3dB
|
SENSITIVITY*
|
96 dB (In-Room)
|
POWER HANDLING (CONT/PEAK)
|
100W/400W
|
NOMINAL IMPEDANCE
|
8 ohms Compatible
|
CROSSOVER FREQUENCY
|
1,440 Hz
|
HIGH FREQUENCY DRIVER
|
1″ Aluminum LTS tweeter mated to a 90 x 90 square Tractrix® Horn
|
LOW FREQUENCY DRIVER
|
Dual 6.5″ spun-copper TCP woofers |
ENCLOSURE MATERIAL
|
MDF
|
ENCLOSURE TYPE
|
Bass-Reflex via rear-firing Tractrix®ports
|
INPUTS
|
Single Gold Plated Binding Posts
|
HEIGHT INCHES (MM)
|
40″ (1017 mm)
|
WIDTH INCHES (MM)
|
9.4″ (240 mm)
|
DEPTH INCHES (MM)
|
15.2″ (386 mm)
|
PRODUCT WEIGHT LBS (KG)
|
41 lbs (18.6 kg)
|
FINISH
|
Black Textured Wood Grain Vinyl
|
INCLUDED ACCESSORIES
|
Injection molded feet & screws
|
*SPL at 1M, half-space anechoic with 2.83V input |
|
|
|
KLIPSCH R-50C |
|
FREQUENCY RESPONSE |
90Hz – 21kHz +/- 3dB |
SENSITIVITY* |
96 dB (In-Room) |
POWER HANDLING (CONT/PEAK) |
100W/400W |
NOMINAL IMPEDANCE |
8 ohms Compatible |
CROSSOVER FREQUENCY |
1,650 Hz |
HIGH FREQUENCY DRIVER |
1″ Aluminum LTS tweeter mated to a 90 x 90 square Tractrix® Horn |
LOW FREQUENCY DRIVER |
Dual 5.25″ spun-copper TCP woofers |
ENCLOSURE MATERIAL |
MDF |
ENCLOSURE TYPE |
Sealed |
INPUTS |
Single Gold Plated Binding Posts |
HEIGHT INCHES (MM) |
7″ (178 mm) |
WIDTH INCHES (MM) |
18.75″ (476 mm) |
DEPTH INCHES (MM) |
8.2″ (208 mm) |
PRODUCT WEIGHT LBS (KG) |
14 lbs (6.3 kg) |
FINISH |
Black Textured Wood Grain Vinyl |
|
|
*SPL at 1M, half-space anechoic with 2.83V input |
|
|
|
KLIPSCH R-50M |
|
FREQUENCY RESPONSE |
58Hz – 21kHz +/- 3dB |
SENSITIVITY* |
92 dB (In-Room) |
POWER HANDLING (CONT/PEAK) |
75W/300W |
NOMINAL IMPEDANCE |
8 ohms Compatible |
CROSSOVER FREQUENCY |
1,560 Hz |
HIGH FREQUENCY DRIVER |
1″ Aluminum LTS tweeter mated to a 90 x 90 square Tractrix® Horn |
LOW FREQUENCY DRIVER |
Single 5.25″ spun-copper TCP woofer |
ENCLOSURE MATERIAL |
MDF |
ENCLOSURE TYPE |
Bass-Reflex via rear-firing ports |
INPUTS |
Single Gold Plated Binding Posts |
HEIGHT INCHES (MM) |
13.9″ (354 mm) |
WIDTH INCHES (MM) |
7″ (178 mm) |
DEPTH INCHES (MM) |
9″ (229 mm) |
PRODUCT WEIGHT LBS (KG) |
11 lbs (5 kg) |
FINISH |
Black Textured Wood Grain Vinyl |
|
|
*SPL at 1M, half-space anechoic with 2.83V input |
|
|
|
KLIPSCH R-120SW |
|
FREQUENCY RESPONSE |
29Hz – 120Hz +/- 3dB |
MAXIMUM ACOUSTIC OUTPUT |
116 dB |
AMPLIFIER |
All Digital |
AMPLIFIER POWER (CONT/PEAK) |
200W/400W |
AMPLIFIER FEATURES |
Volume, Low-pass, 0/180 phase, Auto Power On |
DRIVER COMPONENTS |
12” high excursion spun-copper IMG woofer |
ENCLOSURE MATERIAL |
MDF |
ENCLOSURE TYPE |
Bass-Reflex via rear-firing port |
INPUTS |
Line level/LFE RCA jacks |
HEIGHT |
16.5” (419 mm) |
WIDTH |
14” (356 mm) |
DEPTH |
19.2” ( 488mm) |
WEIGHT |
31 lbs (14.1 kg) |
FINISHES |
Black Textured Wood Grain Vinyl |
BUILT FROM |
2018 |
|
|
ONKYO TX-NR5100 |
|
Amplifier Section |
|
Power output (All channels)
|
165 W/Ch
|
|
(6 ohms, 1 kHz, 10% THD, 1-ch driven) 80 W/Ch (8 ohms, 20 Hz–20 kHz, 0.08% THD, 2-ch driven, FTC)
|
Dynamic power
|
160 W (3 ohms, Front)
|
|
125 W (4 ohms, Front)
|
|
85 W (8 ohms, Front)
|
THD+N (Total Harmonic Distortion + Noise)
|
0.08% (20 Hz–20 kHz,)
|
Input sensitivity and impedance
|
200 mV rms/32 k-ohms (Line)
|
Rated RCA output level and impedance
|
200 mV rms/2.2 k-ohms (Zone B line-out)
|
Frequency response
|
10 Hz–100 kHz/+1 dB,
|
-3 dB (Direct/Pure Audio) |
Tone control
|
±10 dB, 20 Hz (Bass)
|
|
±10 dB, 20 kHz (Treble)
|
Signal-to-noise ratio
|
106 dB (Line, IHF-A)
|
Speaker impedance
|
4–16 ohms
|
Tuner Section
|
|
Tuning frequency range
|
|
FM |
87.5 MHz–107.9 MHz |
AM |
530 kHz–1,710 kHz |
FM/AM preset memory |
40 stations |
General |
|
Power supply |
AC 120 V~, 60 Hz |
Power consumption (operating) |
490 W |
Power consumption (idle) |
45 W |
Power consumption (standby) |
0.1 W |
Dimensions (W x H x D) |
(435 x 160 x 328 mm) |
Weight |
18.5 lbs. (8.4 kg) |
UPC CODE |
|
(B) |
889951003564 |
Supplied Accessories |
Indoor FM antenna • AM loop antenna • Speaker setup microphone
|
|
Quick Start Guide • Remote controller • AAA (R03) batteries x 2
|