KLIPSCH R-600F |
|
FREQUENCY RESPONSE |
38Hz – 21kHz +/- 3dB
|
SENSITIVITY*
|
96 dB (In-Room)
|
POWER HANDLING (CONT/PEAK)
|
100W/400W
|
NOMINAL IMPEDANCE
|
8 ohms Compatible
|
CROSSOVER FREQUENCY
|
1,440 Hz
|
HIGH FREQUENCY DRIVER
|
1″ Aluminum LTS tweeter mated to a 90 x 90 square Tractrix® Horn
|
LOW FREQUENCY DRIVER
|
Dual 6.5″ spun-copper TCP woofers |
ENCLOSURE MATERIAL
|
MDF
|
ENCLOSURE TYPE
|
Bass-Reflex via rear-firing Tractrix®ports
|
INPUTS
|
Single Gold Plated Binding Posts
|
HEIGHT INCHES (MM)
|
40″ (1017 mm)
|
WIDTH INCHES (MM)
|
9.4″ (240 mm)
|
DEPTH INCHES (MM)
|
15.2″ (386 mm)
|
PRODUCT WEIGHT LBS (KG)
|
41 lbs (18.6 kg)
|
FINISH
|
Black Textured Wood Grain Vinyl
|
INCLUDED ACCESSORIES
|
Injection molded feet & screws
|
*SPL at 1M, half-space anechoic with 2.83V input |
|
|
|
KLIPSCH R-50C |
|
FREQUENCY RESPONSE |
90Hz – 21kHz +/- 3dB |
SENSITIVITY* |
96 dB (In-Room) |
POWER HANDLING (CONT/PEAK) |
100W/400W |
NOMINAL IMPEDANCE |
8 ohms Compatible |
CROSSOVER FREQUENCY |
1,650 Hz |
HIGH FREQUENCY DRIVER |
1″ Aluminum LTS tweeter mated to a 90 x 90 square Tractrix® Horn |
LOW FREQUENCY DRIVER |
Dual 5.25″ spun-copper TCP woofers |
ENCLOSURE MATERIAL |
MDF |
ENCLOSURE TYPE |
Sealed |
INPUTS |
Single Gold Plated Binding Posts |
HEIGHT INCHES (MM) |
7″ (178 mm) |
WIDTH INCHES (MM) |
18.75″ (476 mm) |
DEPTH INCHES (MM) |
8.2″ (208 mm) |
PRODUCT WEIGHT LBS (KG) |
14 lbs (6.3 kg) |
FINISH |
Black Textured Wood Grain Vinyl |
|
|
*SPL at 1M, half-space anechoic with 2.83V input |
|
|
|
KLIPSCH R-50M |
|
FREQUENCY RESPONSE |
58Hz – 21kHz +/- 3dB |
SENSITIVITY* |
92 dB (In-Room) |
POWER HANDLING (CONT/PEAK) |
75W/300W |
NOMINAL IMPEDANCE |
8 ohms Compatible |
CROSSOVER FREQUENCY |
1,560 Hz |
HIGH FREQUENCY DRIVER |
1″ Aluminum LTS tweeter mated to a 90 x 90 square Tractrix® Horn |
LOW FREQUENCY DRIVER |
Single 5.25″ spun-copper TCP woofer |
ENCLOSURE MATERIAL |
MDF |
ENCLOSURE TYPE |
Bass-Reflex via rear-firing ports |
INPUTS |
Single Gold Plated Binding Posts |
HEIGHT INCHES (MM) |
13.9″ (354 mm) |
WIDTH INCHES (MM) |
7″ (178 mm) |
DEPTH INCHES (MM) |
9″ (229 mm) |
PRODUCT WEIGHT LBS (KG) |
11 lbs (5 kg) |
FINISH |
Black Textured Wood Grain Vinyl |
|
|
*SPL at 1M, half-space anechoic with 2.83V input |
|
|
|
KLIPSCH R-120SW |
|
FREQUENCY RESPONSE |
29Hz – 120Hz +/- 3dB |
MAXIMUM ACOUSTIC OUTPUT |
116 dB |
AMPLIFIER |
All Digital |
AMPLIFIER POWER (CONT/PEAK) |
200W/400W |
AMPLIFIER FEATURES |
Volume, Low-pass, 0/180 phase, Auto Power On |
DRIVER COMPONENTS |
12” high excursion spun-copper IMG woofer |
ENCLOSURE MATERIAL |
MDF |
ENCLOSURE TYPE |
Bass-Reflex via rear-firing port |
INPUTS |
Line level/LFE RCA jacks |
HEIGHT |
16.5” (419 mm) |
WIDTH |
14” (356 mm) |
DEPTH |
19.2” ( 488mm) |
WEIGHT |
31 lbs (14.1 kg) |
FINISHES |
Black Textured Wood Grain Vinyl |
BUILT FROM |
2018 |
|
|
ONKYO TX-NR6100 |
|
Amplifier Section |
|
Power output (All channels) |
210 W/Ch |
|
(6 ohms, 1 kHz, 10% THD,1-ch driven) 100 W/Ch (8 ohms, 20 Hz–20 kHz, 0.08% THD, 2-ch driven, FTC) |
Dynamic power |
240 W (3 ohms, Front) |
|
210 W (4 ohms, Front) |
|
120 W (8 ohms, Front) |
THD+N (Total Harmonic Distortion + Noise) |
0.08% (20 Hz–20 kHz, half power) |
Input sensitivity and impedance |
200 mV rms/47 k-ohms (Line) |
|
3.5 mV rms/47 k-ohms (Phono MM) |
Rated RCA output level and impedance |
1 V rms/470 ohms (Subwoofer pre-out) |
|
200 mV rms/470 ohms |
|
(Zone 2/Zone B line-out) |
Frequency response |
10 Hz–100 kHz/+1 dB, |
|
-3 dB (Direct/Pure Audio) |
Tone control |
±10 dB, 20 Hz (Bass) |
|
±10 dB, 20 kHz (Treble) |
Signal-to-noise ratio |
106 dB (Line, IHF-A) |
|
80 dB (Phono, IHF-A) |
Speaker impedance |
4–16 ohms |
Tuner Section |
|
FM |
87.5 MHz–107.9 MHz |
AM |
530 kHz–1,710 kHz |
FM/AM preset memory |
40 stations |
General |
|
Power supply |
AC 120 V~, 60 Hz |
Power consumption (operating) |
635 W |
Power consumption (idle) |
65 W |
Power consumption (standby) |
0.1 W |
Dimensions (W x H x D) |
(435 x 173.5 x 379.5 mm) |
Weight |
21.9 lbs. (9.8 kg) |
UPC CODE |
|
(B) |
889951003489 |
Supplied Accessories |
Indoor FM antenna • AM loop antenna • Speaker setup microphone
|
|
Quick Start Guide • Remote controller • AAA (R03) batteries x 2
|