| ONKYO TX-NR5100 |
|
| Amplifier Section |
|
|
Power output (All channels)
|
165 W/Ch
|
|
(6 ohms, 1 kHz, 10% THD, 1-ch driven) 80 W/Ch (8 ohms, 20 Hz–20 kHz, 0.08% THD, 2-ch driven, FTC)
|
|
Dynamic power
|
160 W (3 ohms, Front)
|
|
125 W (4 ohms, Front)
|
|
85 W (8 ohms, Front)
|
|
THD+N (Total Harmonic Distortion + Noise)
|
0.08% (20 Hz–20 kHz,)
|
|
Input sensitivity and impedance
|
200 mV rms/32 k-ohms (Line)
|
|
Rated RCA output level and impedance
|
200 mV rms/2.2 k-ohms (Zone B line-out)
|
|
Frequency response
|
10 Hz–100 kHz/+1 dB,
|
| -3 dB (Direct/Pure Audio) |
|
Tone control
|
±10 dB, 20 Hz (Bass)
|
|
±10 dB, 20 kHz (Treble)
|
|
Signal-to-noise ratio
|
106 dB (Line, IHF-A)
|
|
Speaker impedance
|
4–16 ohms
|
|
Tuner Section
|
|
|
Tuning frequency range
|
|
| FM |
87.5 MHz–107.9 MHz |
| AM |
530 kHz–1,710 kHz |
| FM/AM preset memory |
40 stations |
| General |
|
| Power supply |
AC 120 V~, 60 Hz |
| Power consumption (operating) |
490 W |
| Power consumption (idle) |
45 W |
| Power consumption (standby) |
0.1 W |
| Dimensions (W x H x D) |
(435 x 160 x 328 mm) |
| Weight |
18.5 lbs. (8.4 kg) |
| UPC CODE |
|
| (B) |
889951003564 |
| Supplied Accessories |
Indoor FM antenna • AM loop antenna • Speaker setup microphone
|
|
Quick Start Guide • Remote controller • AAA (R03) batteries x 2
|
|
|
| KLIPSCH RP-500M II |
|
| FREQUENCY RESPONSE |
50-25kHz +/- 3dB
|
|
SENSITIVITY*
|
92dB @ 2.83V / 1m*
|
|
POWER HANDLING (CONT/PEAK)
|
75W/300W
|
|
NOMINAL IMPEDANCE
|
8 Ohms Compatible
|
|
CROSSOVER FREQUENCY
|
1530Hz
|
|
HIGH FREQUENCY DRIVER
|
1″ Titanium LTS Vented Tweeter with Hybrid Cross-Section Expanded Tractrix® Horn
|
|
LOW FREQUENCY DRIVER
|
5.25″ Cerametallic Cone Woofer with Faraday rings
|
|
ENCLOSURE MATERIAL
|
MDF (Internally Braced)
|
|
ENCLOSURE TYPE
|
Bass Reflex via rear-firing Tractrix® Port
|
|
INPUTS
|
Single aluminum binding posts
|
|
HEIGHT INCHES (MM)
|
13.56″ (34.4 cm)
|
|
WIDTH INCHES (MM)
|
6.81″ (17.3 cm)
|
|
DEPTH INCHES (MM)
|
10.65″ (27.0 cm)
|
|
PRODUCT WEIGHT LBS (KG)
|
13.1lb (5.95kg)
|
|
FINISH
|
Ebony, Walnut
|
|
|
|
*SPL at 1M, half-space anechoic with 2.83V input, in-room sensitivity
|
|
|
| KLIPSCH RP-500C II |
|
| FREQUENCY RESPONSE |
56-25kHz +/- 3dB
|
| SENSITIVITY* |
94dB @ 2.83V / 1m*
|
| POWER HANDLING (CONT/PEAK) |
100W/400W
|
| NOMINAL IMPEDANCE |
8 Ohms Compatible
|
| CROSSOVER FREQUENCY |
1630Hz
|
| HIGH FREQUENCY DRIVER |
1″ Titanium LTS Vented Tweeter with Hybrid Cross-Section Expanded Tractrix® Horn
|
| LOW FREQUENCY DRIVER |
Dual 5.25″ CerametallicTM Cone Woofers with Faraday rings
|
| ENCLOSURE MATERIAL |
MDF (Internally Braced)
|
| ENCLOSURE TYPE |
Bass Reflex via rear-firing Tractrix® Port
|
| INPUTS |
Single aluminum binding posts
|
| HEIGHT INCHES (MM) |
6.87″ (17.4 cm)
|
| WIDTH INCHES (MM) |
19.34″ (49.1 cm)
|
| DEPTH INCHES (MM) |
10.58″ (26.9 cm)
|
| PRODUCT WEIGHT LBS (KG) |
18.3lb (8.30kg)
|
| FINISH |
Ebony, Walnut
|
|
ACCESSORIES
|
Angle screw
|
|
|
|
*SPL at 1M, half-space anechoic with 2.83V input, in-room sensitivity
|
|
|
| KLIPSCH SPL-120 |
|
| FREQUENCY RESPONSE |
24Hz – 125Hz
|
|
MAXIMUM ACOUSTIC OUTPUT
|
118dB
|
|
AMPLIFIER TYPE
|
Class D with Analog Preamp Stage
|
|
AMPLIFIER POWER
|
300W RMS / 600W Peak
|
|
WOOFER
|
12” Long-Throw Cerametallic
|
|
ENCLOSURE MATERIAL
|
MDF |
|
ENCLOSURE TYPE
|
Bass Reflex via Front-Firing Slot Port
|
|
INPUTS
|
Dual RCA/LFE Line In, WA-2 Wireless Port
|
|
HEIGHT
|
17-3/4” (451mm)
|
|
WIDTH
|
14-11/16” (374mm)
|
|
DEPTH
|
19-7/8” (506mm)
|
|
WEIGHT
|
45 lbs (20.4kg)
|
|
FINISH
|
Ebony Vinyl
|
|
BUILT FROM
|
2018 |
