Cut-Off Frequency |
Lower: < 38 Hz |
|
Upper: > 37 kHz |
Frequency Response |
45 Hz to 20 kHz (±1.5 dB) |
SPL |
≥ 110 dB SPL maximum (short term sine wave acoustic output on axis in half space, averaged from 100 Hz to 3 kHz at 3.3′ / 1 m) |
|
101 dB SPL maximum (long-term RMS acoustic output in the same conditions with IEC weighted noise (limited by driver protection circuit) at 3.3′ / 1 m) |
Peak |
118 dB maximum peak acoustic output (per pair in listening room with with music material at 3.3′ / 1 m) |
Self-Generated Noise Level |
≤ 3 dB (in free space at 3.3′ / 1 m on axis [A-weighted]) |
Harmonic Distortion |
< 2% (at 90 dB SPL at 3.3′ / 1 m on axis, 50 to 100 Hz) |
|
< 0.5% (at 90 dB SPL at 3.3′ / 1 m on axis, > 100 Hz) |
Drivers |
Bass: dual 6.7 x 3.5″ / 170.0 x 90.0 mm, oval cones |
|
Midrange: 3.5″ / 90.0 mm cone, coaxial |
|
Treble: 0.7″ / 19.0 mm metal dome, coaxial |
Amplifier |
Bass Amplifier Short-Term Output Power: 250 W |
|
Midrange Amplifier Short-Term Output Power: 150 W |
|
Treble Amplifier Short-Term Output Power: 150 W |
|
(Long-term output power is limited by driver protection circuitry) |
THD |
< 0.05% at nominal output |
Digital Connections |
AES/EBU Input: XLR female, 110 Ohms |
|
AES/EBU Thru/Output: XLR male, 110 Ohms |
Sample Rate and Resolution |
32 to 192 kHz / 16- to 24-bit |
Digital Input |
Sensitivity: -30 dBFS |
|
Maximum Attenuation: 42 dB |
Network |
Type: -30 dBFS |
|
Connection: 2 x RJ45 |
Crossover Frequencies |
Bass/Mid: 500 Hz |
|
Mid/Treble: 3 kHz |
Digital Controls |
GLM Software Frequency Response Adjustment |
|
Parametric Notch Filters: 16x |
|
Shelving Filters: 2 x LF and 2 x HF |
|
System Room Response Calibration: Genelec GLM AutoCal, GLM manual, Standalone |
Mains Voltage |
100 to 240 VAC 50/60 Hz |
Power Consumption |
ISS Active: < 0.5 W |
|
Idle: 16 W |
|
Full Output (short term): 250 W |
Analog Input |
XLR female, balanced (pin 1 ground, pin 2 non-inverting, pin 3 inverting) |
Input Impedance |
10 kOhms |
Analog Input |
Maximum Analog Input Level: +24 dBu |
|
Analog Input Sensitivity: -6 dBu (100 dBSPL at 3.3′ / 1 m) |
|
Analog Input Sensitivity Control: Adjustable from +36 to -6 dBu |
Dimensions (H x W x D) |
13.8 x 9.3 x 9.6″ / 351.0 x 237.0 x 243.0 mm, Iso-Pod stand included |
|
14.6 x 9.3 x 9.6″ / 370.0 x 237.0 x 243.0 mm, Iso-Pod stand excluded |
Weight |
21.6 lb / 9.8 kg
|