Sale 20%

สเตจบ๊อก Yamaha Tio1608-D Digital Stage Box with Dante

สเตจบ๊อก Yamaha Tio1608-D Digital Stage Box with Dante สเตจบ๊อกสำหรับมิกเซอร์ดิจิตอล ช่องสัญญาณอินพุต 16 ช่อง ช่องสัญญาณเอ้าท์พุต 8 ช่อง   Stage Box with 16 Microphone Preamplifiers 8 Line Outputs and Dante Digital Connectivity Supports 48V Phantom Power 2x CAT5e LAN Ports (Primary & Secondary) Quick Config Automates TF-Series Setup



[ กรุณาโทรสอบถามสต๊อกสินค้าก่อนทำการสั่งซื้อ ]

สั่งซื้อผ่านไลน์ @siamsoundstore
หมวดหมู่: , ป้ายกำกับ: Brand: YAMAHA


สเตจบ๊อก Yamaha Tio1608-D Digital Stage Box with Dante

สเตจบ๊อก Yamaha Tio1608-D Digital Stage Box with Dante


  • Digital stage box for Yamaha TF series consoles
  • 16 high-quality mic preamps are controllable from your console
  • Connect up to 3 simultaneously for 48 inputs and 24 outputs
  • Requires NY64-D Dante interface card (sold separately)
  • Connects to TF series consoles via standard Cat 5e LAN cable (sold separately)

ดูสินค้ายี่ห้อ YAMAHA ทั้งหมด





General specifications Tio1608-D
Sampling frequency rate External 44.1kHz or 48kHz
Total harmonic distortion Less than 0.1%  4dBu@20Hz-20kHz into 600Ω Gain= 66dB / Less than 0.05%  4dBU@20Hz-20kHz into 600Ω Gain=-6dB INPUT to OUTPUT Fs=44.1kHz 48kHz *Measured with a -18dB/octave filter @80kHz
Frequency response 0.5 -1.5dB 20Hz-20kHz refer to the nominal output level @1kHz INPUT to OUTPUT Fs=44.1kHz or 48kHz
Dynamic range 108 dB INPUT to OUTPUT Gain=-6dB / 112 dB DA Converter
Hum & noise level Equivalent input noise -128dBu Gain= 66dB *Measured with A-weighting filter
Residual output noise -88dBu ST master off *Measured with A-weighting filter
Crosstalk -100dB adjacent INPUT/OUTPUT channels Input Gain = -6dB *Measured with a -30dB/octave filter @22kHz
Heat dissipation 100-240V 50/60Hz 43.5kcal/h
Power requirements 100-240V 50/60Hz
Power consumption 50W
Dimensions W 480mm (18-7/8″)
H 88mm (3-4/8″)
D 364mm (14-3/8″)
Net weight 5.7kg (12.6lbs)
Accessories Owner’s Manual Power Cord(2.5m) Rubber stoppers(4)
Others Temperature Range: Operating temperature range: 0 – 40℃ Storage temperature range: -20 – 60℃

Analog Input Characteristics

Input Terminals GAIN Actual Load
For Use With
Input Level Connector Balanced /
Sensitivity*1 Nominal Max. before clip
INPUT1-16 66dB 7.5kΩ 50-600Ω Mics &
600Ω Lines
-82dBu (61.6μV) -62dBu (0.616mV) -42dBu (6.16mV) Combo Jack (XLR-3-31 type *2
or TRS phone *3)
-6dB -10dBu (245mV) 10dBu (2.45V) 30dBu (24.5V)

In these specifications 0dBu = 0.775Vrms.
48V DC (phantom power) can be supplied to INPUT XLR type connectors via each individual software controlled switch.
*1. Sensitivity is the lowest level that will produce an output of 4dBu (1.23V) or the nominal output level when the unit is set to maximum gain.
*2. 1: GND 2: HOT 3: COLD
*3. Tip: HOT Ring: COLD Sleeve: GND

Analog Output Characteristics

Output Terminals Actual Source
For Use With
Output Level Connector Balanced /
Nominal Max. before clip
OUTPUT 1-8 75Ω 600Ω Lines 4dBu (1.23 V) 24dBu (12.3V) XLR-3-32 type*1 Balanced

In these specifications 0dBu = 0.775Vrms.
*1.1: GND2: HOT 3: COLD

Digital Input & Output Characteristics

Terminal Format Data length Level Audio Connector
Primary/Secondary Dante 24bit or 32bit 1000Base-T 16ch ( Tio1608-D to other devises)
8ch (Other devises to Tio1608-D)
etherCON Cat5e


↓Tio1608-D MANUAL