Processor |
1 x Analog Devices Griffin ADSP-SC587 dual- core DSP @ 500 MHz |
Raw processing capacity |
500 MIPS, 6 GFLOPS, 2 GMACS |
Sampling rate |
48 kHz, ± 100 ppm. |
Frequency response (A/D/A) |
20 Hz – 20 kHz, ± 0.5 dB. |
Dynamic range (A/D/A) |
> 114 dB, A-weighted. |
Channel separation (A/D/A) |
> 110 dB @ 1 kHz, +24 dBu |
Latency (A/D/A) |
1.04 ms, inputs routed to outputs |
Delay memory |
174 mono seconds. |
Analog control inputs |
0-3.3 VDC. |
Recommended external control potentiometer |
10k Ohm, linear. |
Logic outputs |
Low (0V) when active, pulled high (5V) when inactive. |
Logic output maximum external power supply voltage / current sinking |
24 VDC / 50 mA. |
Logic output maximum output current |
10 mA. |
THD + Noise |
< -95 dB (22.4 kHz BW, unweighted); 1 kHz @ +15 dBu with 0 dB gain |
RS-232 accessory serial I/O |
57.6 kbaud (default), 8 data bits, 1 stop bit, no parity, no flow control wired straight-through, only pins 2, 3, and 5 required |
RS-485 serial I/O |
38.4 kbaud (default) 8 data bits, 1 stop bit, no parity, no flow control. May be broken out of ARC port |
Ethernet Cable |
Standard CAT5/6, maximum device to device length = 328 feet / 100 meters |
Dante Cable |
Standard CAT6, maximum device to device length = 328 feet / 100 meters |
ARC Cable |
Standard CAT5/6, distance dependent upon load and number of devices |
Maximum stored presets |
1000. |