|
System
|
|
| Working Range |
300′ (91.4 m) |
| Tuning |
RF Step Size: 25 kHz, varies by region |
| Image Rejection |
>70 dB, typical |
| RF Sensitivity |
-98 dBm at 10^-5 BER |
| Latency |
<2.9 ms |
| Audio Frequency Response |
20 to 20,000 Hz ±1 dB |
| Audio Dynamic Range |
XLR Analog Output: >120 dB, A-weighted |
| System Gain at +10 dB |
| Dante Digital Output: 130 dB typical, A-weighted |
| Total Harmonic Distortion |
-12 dBFS input, System gain at +10: <0.1% |
| Polarity |
Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 1/4″ (6.55 mm) output |
| Operating Temperature Range |
0 to 122°F (-18 to 50°C) |
| Battery characteristics may limit this range |
| Storage Temperature Range |
-20 to 165° (-29 to 74°C) |
| Battery characteristics may limit this range |
| Transmit Power |
1/10/20 mW |
|
|
|
| Housing |
Steel, extruded aluminum |
| Power Requirements |
100 to 240 VAC, 50-60 Hz, 0.26 A max |
| RF Input Connector |
BNC |
| Impedance |
50 Ω |
| Spurious Rejection |
>80 dB, typical |
| Bias Voltage(s) |
12-13 VDC, 150 mA maximum, per antenna |
|
|
|
| Gain Range |
-18 to +42 dB in 1 dB steps (plus mute setting) |
| Configuration |
XLR: Balanced (1=ground, 2=audio +, 3=audio -) |
| Impedance |
100 Ω |
| Full-Scale Output |
|
| XLR: Line Setting = +18 dBV |
| Mic setting = -12 dBV |
| Pad |
30 dB pad |
| Phantom Power Protection |
Yes |
|
|
|
| Power Over Ethernet |
No, protected |
| Network Interface |
Dual-port Ethernet 10/100 Mbps, 1 Gbps |
| Network / Protocol |
DHCP or manual IP address |
| Maximum Cable Length |
Ethernet: 328 ft (100 m) |
| Daisy Chain (Cascade) |
Connector: BNC for connection of 1 additional receiver |
| Configuration: unbalanced, passive |
| Impedance: 50 Ω |
| Rack Size |
1 unit |
| Dimensions |
1.73 x 18.97 x 10.79″ (44 x 482 x 274 mm) |
| Weight |
7.4 lb (3.36 kg) |
|
|
|
| Type |
Dynamic (moving coil) |
| Frequency Response |
50 to 16,000 Hz |
| Polar Pattern |
Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency |
| Phantom Power Requirements |
No |
| Gain Range |
0 to 21 dB (in 3 dB steps) |
| Battery Type |
Shure SB900 rechargeable lithium-ion battery or AA batteries 1.5 V |
| Battery Runtime |
Shure SB900: >11 hours |
| Alkaline AA: 11 hours |
| Housing |
Machined aluminum |
|
|
|
| Frequency Response |
30 to 20,000 Hz |
| Configuration |
Unbalanced |
| Maximum Input Level |
1 kHz at 1% THD: 145 dB SPL (SM58) typical |
| Equivalent Input Noise |
120 dBV, A-weighted, typical |
| RF Bandwidth |
<200 kHz |
| Modulation Type |
Shure Proprietary Digital |
| Power |
1, 10, or 20 mW |
| Dimensions |
10.1 x 2.00″ (256 x 51.0 mm) |
| Weight |
12.0 oz (340 g) without batteries |
