| Analog Input |
|
|
| Maximum Input Level 24.9dBV 1% THD+N. Measured at Dante Output. Line Level, Analog Input Gain |
0dB, Dante Output Gain |
0dB |
| 10.3dBV 1% THD+N. Measured at Dante Output. Aux Level, Analog Input Gain |
0dB, Dante Output Gain |
0dB |
| Frequency Response 22Hz – 20kHz (+0.5dB/-3dB) Measured at Dante Output. -6dBFS input, Line Level, Analog Input Gain |
0dB, Dante Output Gain |
0dB |
| 22Hz – 20kHz (+0.5dB/-3dB) Measured at Dante Output. -6dBFS input, Aux Level, Analog Input Gain |
0dB, Dante Output Gain |
0dB |
Total Harmonic Distortion + Noise 0.03%, typical Measured at Dante Output. -6dBFS input, 1kHz, Line Level, Analog
Input Gain |
0dB, Dante Output Gain |
0dB, 22Hz – 22kHz BW |
| 0.02%, typical Measured at Dante Output. -6dBFS input, 1kHz, Aux Level, Analog Input Gain |
0dB, Dante Output Gain |
0dB, 22Hz – 22kHz BW |
| Dynamic Range 115dB (A-weighted), 113dB (unweighted), typical Measured at Dante Output. Line Level, Analog Input Gain |
0dB, Dante |
|
| Output Gain |
0dB, 22Hz – 22kHz BW |
|
| 112dB (A-weighted), 110dB (unweighted), typical Measured at Dante Output. Aux Level, Analog Input Gain |
0dB, Dante |
|
| Output Gain |
0dB, 22Hz – 22kHz BW |
|
| Preamplifer Equivalent Input Noise -92dBV (A-weighted), typical Line Level, Analog Input Gain |
0dB, 22Hz – 22kHz BW |
|
| -104dBV (A-weighted), typical Aux Level, Analog Input Gain |
0dB, 22Hz – 22kHz BW |
|
| AUDIO OUPUTS |
|
|
| Analog Output |
|
|
| Maximum Output Level 4.3dBV 1% THD+N. Audio Injected at Dante Input. Dante Input Gain |
0dB, |
|
| Analog Output Gain |
0dB |
|
| Frequency Response 1Hz – 20kHz (+0.5dB/-3dB) Audio Injected at Dante Input. -6dBFS input, Dante Input Gain |
0dB, |
|
| Analog Output Gain |
0dB |
|
| Total Harmonic Distortion + Noise 0.01%, typical Audio Injected at Dante Input. -6dBFS input, 1kHz, Dante Input Gain |
0dB, Analog Output Gain |
0dB, 22Hz – 22kHz BW |
| Dynamic Range 100dB (A-weighted), 97dB (unweighted), typical Audio Injected at Dante Input. Dante Input |
| Gain |
0dB, Analog Output |
|
| Gain |
0dB, 22Hz – 22kHz BW |
|
| Load Impedance >600Ω, typical |
|
|
| Type Three-pin Male XLR |
|
|
| Pinout Standard XLR Pinout (Pin 1 = Ground, Pin 2 = Audio +, Pin 3 = Audio -) |
XLR GND Lift Switch Position “Left (Pin 1-GND connected)
Right (Pin1-GND disconnected)”
-104dBV (A-weighted), typical Aux Level, Analog Input Gain |
0dB, 22Hz – 22kHz BW |
|
| Input Impedance 10kΩ Line Level 12kΩ Aux Level |
|
| Confguration Balanced |
|
|
| RF |
|
|
| WLAN Standard IEEE 802.11a,g |
|
|
| RF Frequency Bands 2.4GHz ISM / 5GHz UNII |
|
| Sensitivity -80dBm at 10%PER |
|
|
Output Power 1mW (Low), 5mW (Medium), 13mW (High),
25mW (Maximum) |
|
| Antenna Type Proprietary Internal Bi-level Dual-Band PIFA |
|
| POWER |
|
|
| Supply Type Power Over Ethernet, 802.3af, Class 0 PD |
|
| Supply Voltage (at MXCWAPT) |
|
|
| Power Consumption 12.95W (max), 6.5W (typ) |
|
| NETWORK |
|
|
| Interface Gigabit Ethernet, Dante digital audio |
|
| Link Speed 10/100/1000Mbps |
|
|
| Networking Addressing Capability DHCP or Manual IP address |
|
| Cable Length 100m (max) |
|
|
| Cable Type > Cat5e (shielded/unshielded) |
|
| Connector Type RJ45 |
|
|
| Connector LED Status (Green) / Link Speed (Amber) |
|
| USER INTERFACE |
|
|
| Display Type Monochrome FFSTN LCD |
|
| Display Size 1.84 x 0.74” (46.7×18.8mm) |
|
| Display Resolution 152 x 78 (78 ppi) |
|
| LED Status Indication Power, Network Audio, Wireless (Red/Green/Amber) |
| Reset Pushbutton for Network/Factory Reset |
|
| MECHANICAL |
|
|
| Dimensions 47.8mm x 242.5mm x 241.8mm (1.88” x 9.55” x9.52”) |
|
| Weight 1.15 kg |
|
|
| Color White / Gray |
|
|
| Material Molded Plastic, Die-casted Aluminum |
|
| Mounting Type Wall or ceiling bracket |
|
|
| ENVIRONMENTAL |
|
|
| Operating Temperature Range -7°C (19.4°F) to 49°C (120.2°F) |
|
| torage Temperature Range -29°C (-20.2°F) to 60°C (140°F) |
|
|
Relative Humidity <95%
|
|
|
