| GLXD1 Bodypack Transmitter (Z2 Band: 2400 – 2483.5 MHz) |
|
|
|
1x Unbalanced 4-pin TA4M male mini-connector |
| Tuning Frequency Range |
2400 to 2483.5 MHz |
| Range of Operation |
200′ (60 m) (typical, depends on RF signal absorption, reflection, and interference) |
| Transmit Mode |
Frequency Hopping |
| Frequency Response |
20 Hz to 20 kHz |
| Dynamic Range |
120 dB, A-weighted |
| RF Sensitivity |
-88 dBm, typical |
| Total Harmonic Distortion |
0.2%, typical |
| RF Output |
10 mW E.I.R.P, maximum |
| Operating Temperature Range |
0° to 135°F (-18° to 57°C) |
| Storage Temperature Range |
-20° to 165°F (-29° to 74°C) |
| Polarity |
Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output |
| Battery Life |
Up to 16 hours |
| Power Requirements |
3.7 V Rechargeable Li-Ion |
| Input Impedance |
900 kΩ |
| RF Output |
10 mW E.I.R.P. maximum |
| Maximum Input Level |
1 kHz at 1% THD |
| 8.4 dBV (7.5 Vp-p) |
| Antenna |
Internal Monopole |
| Pin Configuration |
1: ground (cable shield) |
| 2: +5 V bias |
| 3: Audio |
| 4: Tied through active load to ground (On instrument adapter cable, pin 4 floats) |
| Housing |
Cast Metal |
| Dimensions (H x W x D) |
3.56 x 2.54 x 0.90″ (90.4 x 64.5 x 22.9 mm), without antenna |
|
GLXD4 Digital Wireless Receiver (Z2 Band: 2400 – 2483.5 MHz)
|
|
|
|
1x XLR Output |
| 1x 1/4″ (6.35 mm) Output |
| Output Impedance |
XLR: 100 Ω |
| 1/4″: 100 Ω, 50 Ω unbalanced |
| Maximum Audio Output Level Analog |
XLR: 1 dBV (into 600 Ω load) |
| 1/4″: 8.5 dBV (into 3 kΩ load) |
| Tuning Frequency Range |
2400 to 2483.5 MHz |
| Range of Operation |
200′ (60 m) (typical, depends on RF signal absorption, reflection, and interference) |
| Transmit Mode |
Frequency Hopping |
| Frequency Response |
20 Hz to 20 kHz |
| Dynamic Range |
120 dB, A-weighted |
| RF Sensitivity |
-88 dBm, typical |
| Total Harmonic Distortion |
0.2%, typical |
| RF Output |
10 mW E.I.R.P., maximum |
| Operating Temperature Range |
0° to 135°F (-18° to 57°C) |
| Storage Temperature Range |
-20° to 165°F (-29° to 74°C) |
| Pin Configuration |
XLR: 1= ground, 2= hot, 3=cold |
| 1/4″: Tip= audio, ring= no audio, sleeve= ground |
| Antenna |
Impedance: 50 Ω |
| Type: 1/2 wave sleeve dipole, non-removable |
| Max Input Level: -20 dBm |
| Power Requirements |
14 to 18 V DC (tip positive with respect to ring), 550 mA |
| Spurious Rejection |
>35 dB, typical |
| Gain Adjustment Range |
-20 to 40 dB in 1 dB steps |
| Phantom Power Protection |
Yes |
| Housing |
Molded plastic |
| Dimensions (HxWxD) |
1.6 x 7.2 x 4.6″ (40 x 183 x 117 mm) |
| Weight |
10.1 oz (286 g) |
