| SPECIFICATIONS |
WL2102-w |
|
| Configuration |
Biamp or Triamp mode |
|
| Transducers |
|
|
| High Frequency |
1.4-inch exit, 3-inch titanium diaphragm, neodymium magnet assembly |
|
| Low Frequency |
2 x 400 W, 16Ω 10″ woofer, 3″ voice coil, ceramic magnet assembly |
|
| Frequency Response (±3 dB) |
55 Hz – 18 kHz (with recommended DSP processing) |
|
| Frequency Range (-10 dB) |
48 Hz – 20 kHz (with recommended DSP processing) |
|
| Nominal Impedance |
HF: 16Ω
LF bi-amp mode: 8Ω
LF tri-amp mode: 16Ω (x 2) |
|
| Continuous Power Capacity/ Recommended Power |
HF: 80 W / 300 W (2 hours, AES1984-2 method, 1 – 10 kHz)
LF bi-amp mode: 600 W / 1400 W (2 hours, AES1984-2 method, 80 – 800 Hz)
LF tri-amp mode: 400 W / 700 W (x 2) (2 hours, AES1984-2 method, 80 – 800 Hz) |
|
| Sensitivity (1 W at 1 m) |
HF: 107.5 dB (single cabinet measured in free space.)
LF: 98 dB (single cabinet measured in free space. LF drivers connected in parallel) |
|
| Maximum Output – Continuous/ Peak (SPL at 1 m) |
HF: 127 dB / 133 dB
LF: 127 dB / 133 dB |
|
| Nominal Coverage |
H: 140°
V: dependent on number of elements used |
|
| Cabinet Type |
Ported / trapezoidal |
|
| Enclosure Material |
Cored composite |
Baltic birch plywood |
| Grille |
Grille Perforated, formed powder coated steel |
|
| Connectors |
2 x Neutrik Speakon® NL8 in parallel |
|
| Pin Outs |
Pins Bi-Amp Tri-Amp
1+/1- LF MF
2+/2- NC LF
3+/3- NC NC
4+/4- HF HF |
|
| Attachment Points |
Integral, adjustable rigging system, vertical splay adjustable in 1° increments from 0° – 10° |
| Weight (Net / Shipping) |
70 lb (31.8 kg) / 78 lb (35.5 kg) |
83 lb (37.7 kg) / 91 lb (41.4 kg) |
| Dimensions (HWD) |
10.8″ x 27.4″ x 20.75″ (274 mm x 696 mm x 527 mm) |
|
| Specifications subject to change without notice. |
|
