| Specifications |
SPA-Qf 60×4 |
| Amplifier Channels |
4 |
| Single Ended* |
|
| 8 Ω |
60 W |
| 4 Ω |
60 W |
| Bridge Tied Load |
|
| 8 Ω |
120 W |
| 70 V rms |
120 W |
| 100 V rms |
120 W |
| Frequency Response (4 & 8 Ω) |
20 Hz – 20 kHz (+0.2/-.08 dB) |
| Voltage Peak Rating |
75 Vpk |
| Current Peak Rating |
12 Apk |
Signal to Noise
(20 Hz – 20 kHz, A-Weighted) |
>100 dB |
| Output Circuitry |
Class D |
| Voltage Gain (Lo-Z/70 V/100 V) |
25/29/32 dB (Vrms/FS) |
| High-Z setting (software setting) |
70 V RMS or 100 V RMS |
| Low-Z operation range |
2 – 16 Ω |
| GPIO |
1 x 3.5 mm 6 position Euro (Black) 4x bi-direction pins, 1x Power Pin (3.3V, 100mA), 1x Ground Pin |
| Audio flex channel capacity |
2 |
| Audio flex channel assignments |
Each channel can be configured as a mic / line input or as a line output (configured through Q-SYS Designer Software) |
| Amplifier and load protection |
Short circuit, open circuit, over current, over voltage, thermal, RF, DC fault shutdown, active inrush limiting, on/off muting |
| AC Power Input |
Universal Power Supply 100 – 240 VAC + / -10%, 50 – 60 Hz with PFC |
| Operating Temperature Range @ 95% N.C. Humidity |
32° – 122° F (0° – 50° C) |
| Storage Temperature |
-4° – 158° F (-20° – 70° C) |
| Cooling |
Convection |
| Product Dimensions (HWD) |
1.75 x 8.7 x 11.25 in (44 x 221 x 286 mm) |
| Agency Approvals (tentative) |
UL, CE, RoHS / WEEE compliant, FCC Class B (conducted and radiated emissions), CCC, NOM |
| Included Accessories |
Rack / wall mounting kit and power cord |
