Mogami 2932 – 8 Channel Snake Cable สายไมโครโฟน 8 ชาแนล

Mogami 2932 Multicore Microphone Cable สายไมโครโฟนสำเร็จรูป คุณภาพสูงเพื่อการนำสัญญาณที่ดีเยี่ยม ป้องกันสัญญาณรบกวนได้ดี (ราคาต่อ 1 เมตร)




[ กรุณาโทรสอบถามสต๊อกสินค้าก่อนทำการสั่งซื้อ ]

สั่งซื้อผ่านไลน์ @siamsoundstore
หมวดหมู่: , ป้ายกำกับ: Brand: MOGAMI


Mogami 2932 – 8 Channel Snake Cable สายไมโครโฟน 8 ชาแนล 

Mogami 2932 – 8 Channel Snake Cable สายไมโครโฟน 8 ชาแนล


  • Individually twisted shielded pairs, available in 2 to 48 channels.
  • XLPE (Cross Linked Polyethylene) insulation provides superb electrical characteristics and will not melt or shrink back during soldering.
  • Rugged and flexible construction that is easy to handle, even at temperatures down to -20°C (-4°F).
  • Easy cable identification system:
    • Channel numbers are printed and underlined on each core jacket to ensure correct identification, regardless of which end is stripped.
    • Outer jackets of each pair are colour coded by standard resistor colour code, allowing quick identification of conductor pairs.
    • Inner conductors are also colour coded based on the international standard resistor colour code. Each pair is colour coded by jacket and conductor colour combination.
  • Each channel has a drain wire and served (spiral) bare copper shield. The drain wire simplify termination and can be crimped by the same size contact as the inner conductor pair.
  • CL2 rated version available. Conductor size of CL2 rated version is thicker #25AWG so that it is also recommended for rugged application and firm and easier crimp terminal connector wiring as well as NEC fire regulation requirement.

ดูสินค้ายี่ห้อ MOGAMI ทั้งหมด






Part No. No. of Channels Ov. Dia. (Approx. mm) Jacket Thickness (Approx. mm) Weight (kg/100m)(kg/328Ft) Maximum Length available
W2930 2-ch 7.5(0.295″) 1.0(0.039″) 7 506m (1,659Ft)
W2931 4-ch 8.6(0.339″) 1.0(0.039″) 9
W2932 8-ch 11.5(0.453″) 1.2(0.047″) 18
W2933 12-ch 14.3(0.563″) 1.5(0.059″) 28
W2934 16-ch 15.8(0.622″) 1.5(0.059″) 32 305m (1,000Ft)
W2935 19-ch 17.0(0.669″) 1.7(0.067″) 40
W2936 24-ch 20.0(0.787″) 2.0(0.079″) 46
W2937 27-ch 20.5(0.807″) 2.0(0.079″) 58
W2938 32-ch 21.7(0.854″) 2.0(0.079″) 63
W2939 48-ch 26.0(1.02″) 2.0(0.079″) 97 200m (656Ft)


Conductor 30/0.08A (0.15mm²) #26AWG             (30×#40AWG)
Insulation 1.0Ø XLPE (Cross Linked Polyethylene)      (0.039″)
Drain Wire 7/0.18TA (0.18mm²) #25AWG               (7×#33AWG)
Served Shield Approx. 58/0.10A Served (spiral) Shield
Jacket (Covering) 2.8Ø Flexible PVC                                              (0.110″)
Identification See core number identification table


DC Resistance at 20°C Inner Pair Conductor 0.13Ω/m(0.040Ω/Ft)
Shield 0.031Ω/m(0.0095Ω/Ft)
Capacitance at 1kHz, 20°C (Partial Capacitance Value) See Figure (1) K0 130pF/m(40pF/Ft)
K1 12pF/m(3.7pF/Ft)
Inductance 0.6µH/m(0.18µH/Ft)
Electrostatic Noise (Hum Pick-up)* 2.5mV Max.
Electromagnetic Noise at 10kHz*
(Inductance of the toroidal core: 595µH)
0.1mV Max.
Method: Stepping on cable
50mV Max. at 50kΩ/ Load
Voltage Breakdown Must withstand at DC 500V/15sec.
Insulation Resistance at DC 125V, 20°C 100000 MΩ/ × m Minimum
Tensile Strength of one pair (26°C, 65% RH) 274N
Emigration Non-emigrant to ABS resin
Applicable Temperature -20°C‾ +70°C(-4°F‾ +158°F)
Standard UL13 CL2X 60°C / UL 20002 AWM 30V 60°C VW-1