| General |
| Number of amplifier channels |
2 |
| Max total output all channels driven |
240 W |
| Max output voltage per channel 1 |
43.8 V peak |
| Max output current per channel |
7.8 Arms |
| Max output power (all channels driven) |
| 2 ohms |
120 W |
| 4 ohms |
120 W |
| 8 ohms |
120 W |
| 16 ohms |
60 W |
| Performance |
| THD 20 Hz – 20 kHz at 1 W into 8 ohms |
<0.3% |
| THD at 1 kHz and 1 dB below clipping |
<0.2% |
| Signal to Noise Ratio |
>101 dBA |
| Channel separation (Crosstalk) at 1 kHz |
>60 dBA |
| Frequency Response |
5 Hz – 22 kHz |
| Input impedance |
10 kOhm |
| Common Mode Rejection (CMR) |
40 dB |
| Gain Sensitivity and Limiters |
| VPL for 16 ohm mode |
43.8 Vpeak |
| VPL for 8 ohm mode |
43.8 Vpeak |
| VPL for 4 ohm mode |
31 Vpeak |
| VPL for 2 ohm mode |
22 Vpeak |
| Sensitivity balanced input |
4 dBu / 1.23 Vrms |
| Sensitivity RCA input |
-2 dBu / 0.62 Vrms |
| Input headroom for clip balanced 2 |
12 dBu / 3.09 Vrms |
| Input headroom for clip RCA 2 |
6 dBu / 1.55 Vrms |
| Connectors and Buttons |
| Input connectors (per ch.) |
3 – pin detachable screw terminals electronically balanced |
| Input connectors (ch. 1 & 2) |
Unbalanced RCA type |
| Output connectors (per ch.) |
2 – pin detachable screw terminals |
| Line-level output connectors (ch. 3 & 4) |
3 – pin detachable screw terminals electronically balanced |
| GPO (power state output) 3 |
Contact closure type 2 pins in a detachable screw terminal
Default for external monitoring of fault/protection/power off |
| USB |
For firmware update and configuration for the matrix models |
| RS232 |
Can be controlled and monitored by third parties via RS232 using both the GPI pins |
| Level adjustment (per channel) |
Front panel potentiometer detented from -inf to 0 dB |
| Processing Features |
| Input processing block 4 |
4 EQ sections per input |
| Mix matrix routing block 4 |
4 in – 4 out mix-matrix controllable from GPI |
| Output processing block 4 |
4 EQ sections per output (presets available for many loudspeakers)
User adjustable output look ahead limiter
ADLC (Adaptive ISO 226 compensation) |
| Two line level outputs 5 |
Each capable of driving 10 LUCIA devices in parallel |
| Latency from any input to any output |
User adjustable from 9.15 to 137 ms |
| Power |
| Nominal voltage |
100 – 240 VAC |
| Operating voltage |
85 – 265 VAC |
| Standby consumption |
<1 W |
| Mains connector |
IEC inlet |
| Cooling |
One fan no filter required front to rear airflow temperature controlled speed. Can stay off if the sustained power average stays below 2 × 6 W and the ambient temperature is below 25 C |
| Auto mode |
The power state is controled automatically by the audio signal |
| Dimensions |
| Dimensions |
W: 216 mm (8.5”) H: 44 mm (1 U) D: 280 mm (11”) |
| Weight |
| Weight |
1.9 kg (4.2 lbs) |
| Finish |
| Finish |
Black aluminum front and black steel chassis |
| Approvals |
| Approvals |
CE CSA CCC PSE FCC Energy Star |
