| General |
| Number of amplifier channels |
1 |
| Max total output all channels driven |
240 W |
| Max output voltage |
100 Vpeak |
| Max output Current |
7 Arms |
| Performance |
| 70 V |
240 W |
| 100 V 1 |
120 W |
| 16 ohms |
240 W |
| Signal to Noise Ratio |
>100 dBA |
| Gain Sensitivity and Limiters |
| VPL |
100 Vpeak |
| Sensitivity balanced input |
4 dBu / 1.23 Vrms |
| Sensitivity RCA input |
-2 dBu / 0.62 Vrms |
| Input headroom for clip balanced 2 |
12 dBu / 3.09 Vrms |
| Input headroom for clip RCA 2 |
6 dBu / 1.55 Vrms |
| Connectors and Buttons |
| Input connectors (per ch.) |
3 – pin detachable screw terminals electronically balanced |
| Input connectors (ch. 1 & 2) |
Unbalanced RCA type |
| Output connector |
2 – pin detachable screw terminal |
| GPI 3 |
2 channels of voltage sense type. 4 pins in a detachable screw terminal. Default functionality is output level for GPI1 and wake up from stand by for GPI2. |
| GPO (power state output) 3 |
Contact closure type 2 pins in a detachable screw terminal
Default for external monitoring of fault/protection/power off |
| USB |
For firmware update and configuration of the signal processing and altering the default functions of the GPI ports |
| High pass filter |
This filter is in series with the other filters in the DSP and it is controlled with switches on the back. Settings OFF / 50 Hz / 80 Hz. |
| Level adjustment (per input) |
Front panel potentiometer detented from -inf to 0 dB |
| RS232 |
Can be controlled and monitored by third parties via RS232 using both the GPI pins |
| Processing Features |
| Input processing block 4 |
4 EQ sections per input |
| Mix matrix routing block 4 |
2 in – 1 out mix-matrix controllable from GPI |
| Output processing block 4 |
4 EQ sections per output (presets available for many loudspeakers)
User adjustable output look ahead limiter
ADLC (Adaptive ISO 226 compensation) |
| Latency from any input to any output |
User adjustable from 9.15 to 137 ms |
| Power |
| Nominal voltage |
100 – 240 VAC |
| Operating voltage |
85 – 265 VAC |
| Standby consumption |
<1 W |
| Mains connector |
IEC inlet |
| Cooling |
One fan no filter required front to rear airflow temperature controlled speed. Can stay off if the sustained power average stays below 12 W and the ambient temperature is below 25 C |
| Auto mode |
The power state is controled automatically by the audio signal |
| Dimensions |
| Dimensions |
W: 216 mm (8.5”) H: 44 mm (1 U) D: 280 mm (11”) |
| Weight |
| Weight |
1.9 kg (4.2 lbs) |
| Finish |
| Finish |
Black aluminum front and black steel chassis |
| Approvals |
| Approvals |
CE CSA CCC PSE FCC Energy Star |
