| General |
| Number of amplifier channels |
2 |
| Max total output all channels driven |
2400 W |
| Peak output voltage per channel |
70 Vrms |
| Max output current per channel |
20 Arms |
| Max output power (all channels driven) |
| 2 ohms |
800 W |
| 4 ohms |
1200 W |
| 8 ohms |
600 W |
| 16 ohms |
300 W |
| Performance |
| THD 20 Hz – 20 kHz at 1 W |
<0.1% |
| THD at 1 kHz and 1 dB below clipping |
<0.05% |
| Signal to Noise Ratio |
>102 dBA |
| Channel separation (Crosstalk) at 1 kHz |
>80 dB |
| Frequency Response |
2 Hz – 42 kHz |
| Input impedance |
18 kOhm |
| Common Mode Rejection (CMR) |
50 dB |
| Output impedance |
25 mOhm |
| Gain Sensitivity and Limiters |
| SCVPL |
100 V peak |
| Sensitivity for full power |
6 dBu |
| Gain (all DSP controls set to 0 dB) |
33.2 dB |
| Level adjustment (per channel) |
Software controlled from -inf to 0 dB |
| Connectors and Buttons |
| Analog input connectors (per ch.) |
Neutrik XLR 3pin female |
| Analog input link connectors (per ch.) |
Neutrik XLR 3pin male |
| AES input connectors (per ch.) |
Neutrik XLR 3pin female |
| AES input link connectors (per ch.) |
Neutrik XLR 3pin male |
| Output connectors (per ch.) |
Neutrik speakON / binding post |
| Buttons |
Power Menu Back Mute (per ch.) Power |
| Encoder |
Adjust / Set |
| Cooling |
Dual fan front to rear airflow no filter required temperature controlled speed |
| Power |
| Nominal voltage |
100 – 240 VAC |
| Operating voltage |
60 – 265 V AC |
| Standby consumption |
<7.5 W |
| Mains connector |
IEC inlet |
| Dimensions |
| Dimensions (Rack rail to rear panel) |
W: 483 mm (19”) H: 44 mm (1 U) D: 359 mm (14.1”) |
| Dimensions (Overall incl. handles and rear support) |
W: 483 mm (19”) H: 44 mm (1 U) D: 431 mm (17”) |
| Finish |
| Finish |
Black anodized aluminum front and black / gray steel chassis |
| Approvals |
| Approvals |
CE PSE UL 60065 CAN/CSA-C22.2 No.60065:03 FCC part 15 Class A EN 55103-1 EN55103-2 ROHS |
