| General |
| Number of amplifier channels |
2 |
| Peak total output all channels driven |
14000 W |
| Peak output voltage per channel |
195 V |
| Max output current per channel |
90 A peak |
| Max output power (all channels driven) |
| 2 ohms |
7000 W |
| 4 ohms |
4400 W |
| 8 ohms |
2350 W |
| 16 ohms |
1200 W |
| Max output power bridged |
| 2 ohms |
Not recommended 1 |
| 4 ohms |
14000 W |
| 8 ohms |
8800 W |
| 16 ohms |
4700 W |
| Performance |
| THD 20 Hz – 20 kHz at 1 W |
<0.1% |
| THD at 1 kHz and 1 dB below clipping |
<0.05% |
| Signal to Noise Ratio |
>112 dBA |
| Channel separation (Crosstalk) at 1 kHz |
>70 dB |
| Input impedance |
20 kOhm |
| Common Mode Rejection (CMR) |
>54 dB 20 Hz – 20 kHz |
| Gain Sensitivity and Limiters |
| VPL selectable per ch |
195 170 140 116 100 80 66 54 V |
| VPL when bridged 2 |
390 340 280 232 200 160 132 108 V |
| Voltage Peak Limiter mode (per ch.) |
Hard / Soft |
| Amplifier gain selectable (all channels) – rear-panel switches 2 |
23 26 29 32 35 38 41 44 dB |
| Default gain |
38 dB |
| Level adjustment (per channel) |
Front-panel potentiometer 31 position detented from -inf to |
| Connectors and Buttons |
| Input connectors (per ch.) |
3-pin XLR electronically balanced |
| Output connectors (per ch.) |
Binding post |
| Output bridge mode |
A B – Ch. A is signal input source. A B C D – Ch.’s A and C are input source |
| NomadLink network |
On board 2 x RJ45 connectors IN and OUT |
| Intelligent fans (on/off) |
Yes depending on presence of output signal |
| Power on/off and Remote enable on/off |
Individual switches on front-panel |
| Cooling |
Dual fan front to rear airflow no filter required temperature controlled speed |
| Front-panel user interface |
| Common |
NomadLink Network; Power Average Limiter (PAL)4; Power on |
| Per channel |
Signal present / High-impedance; -10 dB and -4 dB output signal;Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute |
| Power |
| Operating voltage 230 V / 115 V nominal 3 |
130-265 V / 65 -135 V |
| Minimum power-up voltage 230 V / 115 V |
171 V / 85 V |
| Power Average Limiter (PAL) 4 |
Yes |
| Soft-start / Inrush Current Draw |
Yes / max. 5 A |
| Mains connector |
230 V CE: 16 A CEE7; 115 V ETL: 30 A Twist lock |
| Dimensions |
| Dimensions |
W: 483 mm (19”) H: 88 mm (2 U) D: 396 mm (15.6”) |
| Weight |
| Weight |
12 kg (26.4 lbs) |
| Finish |
| Finish |
Black painted steel chassis with black painted steel / aluminum front |
| Approvals |
| Approvals |
CE ANSI/UL 60065 (ETL) CSA C22.2 NO. 60065 FCC |
