Max. Single Channel Output Power, Dynamic-Headroom, IHF-A |
into 2.66 Ω |
2 x 1600 W |
into 4 Ω |
2 x 1250 W |
into 8 Ω |
2 x 675 W |
Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1% |
into 2.66 Ω |
2 x 1350 W |
into 4 Ω |
2 x 1150 W |
into 8 Ω |
2 x 650 W |
Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel |
into 2.66 Ω |
2 x 1350 W |
into 4 Ω |
2 x 1000 W |
into 8 Ω |
2 x 600 W |
Rated Output Power, 20 Hz to 20 kHz, THD < 0.5%, Single Channel |
into 4 Ω |
2 x 900 W |
into 8 Ω |
2 x 450 W |
Maximum Output Voltage, of power amplifier, 1 kHz, no load |
74 Vrms |
THD, at 1 kHz, MBW = 80 kHz |
MIC input to Master A L/R outputs, +16 dBu, typical |
< 0.005% |
POWER AMP INPUTS to Speaker L/R outputs |
< 0.075% |
DIM 30, power amplifier, 3.15 kHz, 15 kHz |
< 0.05% |
IMD-SMPTE, power amplifier, 60 Hz, 7 kHz |
< 0.15% |
Frequency Response, -3 dB, ref. 1 kHz |
Any input to any Mixer output |
15 Hz to 70 kHz |
Any input to Speaker L/R output |
20 Hz to 30 kHz |
Crosstalk, 1 kHz |
Amplifier L/R |
< -85 dB |
Channel to Channel |
< -80 dB |
Mute- & Standby-Switch attenuation |
> 100 dB |
Fader & FX/AUX/MON-Send attenuation |
> 85 dB |
CMRR, MIC input, 1 kHz |
> 80 dB |
Input Sensitivity, all level controls in max. position |
MIC |
-74 dBu (155 µV) |
LINE (Mono) |
-54 dBu (1.55 mV) |
LINE (Stereo) |
-34 dBu (15.5 mV) |
CD (Stereo) |
-34 dBu (15.5 mV) |
POWER AMP INPUTS |
+8 dBu (1.95 V) |
Maximum Level, mixing desk |
MIC inputs |
+11 dBu |
Mono Line inputs |
+31 dBu |
Stereo Line inputs |
+31 dBu |
All other inputs |
+22 dBu |
All other outputs |
+22 dBu |
Input Impedances |
MIC |
2 ㏀ |
CD In |
10 ㏀ |
All other inputs |
> 15 ㏀ |
Output Impedances |
Phones |
47 Ω |
All other outputs (balanced/unbalanced) |
150 Ω / 75 Ω |
Equivalent Input Noise, MIC input, A-weighted, 150 ohms |
-130 dBu |
Noise, Channel inputs to Master A L/R outputs, A-weighted |
|
Master fader down |
-100 dBu |
Master fader 0 dB, Channel fader down |
-92 dBu |
Master fader 0 dB, Channel fader 0 dB, Channel gain unity |
-82 dBu |
Signal/Noise-Ratio, power amplifier, A-weighted, 4 Ω |
105 dB |
Output Stage Topology, amplifier |
Class D |
Equalization |
LO Shelving |
±15 dB / 60 Hz |
MID Peaking |
±12 dB / 2.4 kHz |
HI Shelving |
±15 dB / 12 kHz |
Master EQ 9-band (63, 125, 250, 500, 1k, 2k, 4k, 6.3k, 12kHz) |
±10 dB / Q = 1.5 to 2.5 |
Filter |
LO-CUT, mono inputs |
f = 80 Hz, 18 dB/oct., switchable |
Speaker Processing |
LPN, switchable |
Effects |
|
Type |
2 x Stereo 24/48-bit multi effects processors |
Effects presets |
100 Factory + 20 User, Tap-Delay |
Remote control |
Footswitch, MIDI |
Display |
128 x 64 pixels, OLED |
Digital Audio Interface |
Channels |
4 In / 4 Out |
AD/DA Conversion |
24-bit |
Sampling Rate |
44.1 / 48 / 88.2 / 96 kHz |
PC Interface |
USB2.0, Female Type B |
Peak Display |
6 dB before Clip |
MIDI Interface |
5-pin DIN connector, In / Out |
Output Power Control (Speaker Protection) |
Adjustable longterm RMS Limiter |
Protection |
Mixer Outputs, relay controlled |
AUX, MON, MASTER A L/R |
Amplifier |
Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF |
Switching Mode Power Supply (µC controlled) |
Inrush Current Limiters, Mains Over/Undervoltage, Mains Over Current, High Temperature |
Cooling |
Continuous speed controlled Fans |
Phantom Power, switchable |
48 V DC |
Power Requirements (SMPS with auto range mains input) |
100 V to 240 V AC, 50 Hz to 60 Hz |
Power Consumption, at 1/8 maximum output power, 4 Ω |
450 W |
Safety Class |
I |
Ambient Temperature Limits |
+5 °C to +40 °C (40 °F to 105 °F) |
Dimensions (W x H x D), mm |
With lid: 438.8 x 161.7 x 362.5 Rack-mount: 483 x 135.8 x 310.3 (7 HU) |
Weight |
Net Weight, without lid |
9.0 kg |
Net Weight, with lid |
9.5 kg |
Shipping Weight |
12 kg |
Warranty |
36 months |
Optional Accessories |
|
Rack Mount Kit |
F01U214880 (DC-RMK-600-3) |
FS 11 (Footswitch with LED) |
F01U100598 (DC-FS11) |
Carrying bag |
F01U259014 (DC-BAG-600PM) |