ดิจิตอลมิกเซอร์ DIGICO SD9 Worksurface Digital Mixer

สเปคสินค้า

Specifications

General Specifications

• Faders:: 24 x 100mm Touch-sensitive motorised
• Screens:: 1 x 15” (38cm) LCD high – resolution touch screen
• Meters:: 24 x 8-Segment LED bargraph
• Input Channels:: 96 Input Channels
• 48 Aux/ Sub-Group Busses
• Solo Busses: 2 Stereo Busses
• Matrix: 12 x 8 Matrix (additional to busses above)
• Control Groups: 12 Selectable for VCA-style Moving Fader Mute Group
• Graphic EQ: 16 x 32-band Gain /- 12dB
• Internal FX: 12 Stereo FX Processors
• Local I/O: 8 x Mic/Line I/O 4 x AES/EBU: I/O (Mono)
• MADI Interface: In / Out /
• Optional Optics
• MIDI Interface: In / Out / Thru
• VGA Port: DB-15 Mini-Female (1024 x 768 Resolution)
• USB Ports (3): USB 2
• Light Connection (2): XLR3 1.2 – 12V
• Ext Sync: Word Clock MADI
• Headphone: TRS Unbalanced / 8-600 Ohms 1/4 Inch Jack
• GPI: 2 x 1/4” Jack TF
• GPO: 2 x 1/4” Jack TF
• SD9 Dimensions: 878mm (w) x 785mm (d) x 262mm (h)
• SD9 Weight: 36Kg (105Kg with optional flightcase)
• SD9 Flightcase: 1063mm (w) x 1131mm (h) x 472mm (d) (Optional):
• SD9 Power: 90-264 VAC 47-63Hz Auto Sensing. 208 watts 232VA Requirements
• Redundancy: Internal PSU x 2 (Optional)

Audio Specification

• Sample Rate: 48kHz or 96kHz
• Processing Delay: 2ms Typical @ 48k (48 Stereo Channels Stage Input Through L-R Buss to Stage Output) 1.1ms @ 96k
• Internal Processing: Up to 40-bit Floating Point
• A>D & D>A: 24-bit Converter Bit Depth
• Frequency Response: /- 0.6dB (20Hz – 20kHz)
• THD: <0.05% @ Unity Gain: 10dB Input @ 1kHz
• Channel Seperation: Better Than 90dB: (40Hz – 15kHz)
• Residual Output: <90dBu Typical
• Noise: (20Hz – 20kHz)
• Microphone Input: Better Than -126dB: Equivalent Noise
• Maximum Output Level: 22dBu
• Maximum Input Level: 22dBu

Processing Channel Specification
Input Channel

• Name: User-Defined / Presets
• Channel Selection: Mono / Stereo / Multi
• Input Routing: Main & Alternate Input
• Analogue Gain: -20 to 60dB
• Phase: Normal / Reverse
• Digital Trim: -40 to 40dB
• Delay: >1 Sec (Coarse & Fine Control)
• DiGiTuBe: Drive 0.01 – 50.0
• Bias 0 – 6
• LPF: 20 – 20kHz 24dB/Oct
• HPF: 20 – 20kHz 24dB/Oct
• Insert A: (Pre EQ/Dyn) On/Off

• Equalisation: 4 Band EQ: Parametric or Dynamic (Low/Lowshelf Lower-Mid/Lowshelf Upper-Mid/
  Hi Shelf Hi/Hishelf)
  On/Off
  Freq; 20 – 20kHz
  Gain; /- 18dB
  Q: 0.1 -20 (Parametric) / 0.10-0.85 (Shelf)
  Dynamic EQ On/Off
  Over/Under
  Band On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1

• Dynamics 1: Single or Multiband (3-Band)
  Compressor: On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
  Gain; 0 to 40dB with
  Autogain Option
  Link; Any Channel/Buss
  Hi Crossover; 20Hz – 20kHz
  Lo Crossover; 20Hz – 20kHz
  Knee : Hard Med Soft
  De-Esser: Threshold : 20us – 20ms
  Release : 1ms – 100ms
  Ratio : 1:1 – 50:1
  Ess-Band : Listen On/Off
  Ess-Band Filter Freq / Width: 20Hz – 20kHz

• Dynamics 2: On/Off
  Gate / Ducker: Threshold; -60 – 0dB
  Attack; 50us – 100ms
  Hold; 2ms – 2s
  Release; 5ms – 5s
  Range; 0 – 90dB
  Key; Any Source
  Key Listen
  Freq/Width; 20 – 20kHz
  Compressor: On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
  Gain; 0 to 40dB with
  Autogain Option
  Link; Any Channel / Buss
  Hi Crossover; 20Hz – 20kHz
  Lo Crossover; 20Hz – 20kHz
  S/C Source : Any Source
  S/C Listen : On/Off
  S/C Filter Freq/Width: 20Hz – 20kHz

• Insert B: (Post EQ/Dyn) On/Off
• EQ/Dyn order: EQ/Dyn or Dyn/EQ
• Mute: Channel Mute / Hard Mute
• Solo: Solo Buss 1 / Solo Buss 2 / Both Auto Solo
• Channel Safe: Input EQ Dyn Aux Pan Fade/Mute Inserts Buss Directs
  Full Safe
• Output Routing: Buss Insert A Insert B FX
  Direct: On/Off Pre-Mute / Pre-Fade / Post-Fade Level /- 18dB
• Fader: 100mm Motorised Fader ∞ to 10dB

Processing Channel Specification
Aux / Group / Matrix Output

• Name: User-Defined / Presets
• Phase: Normal / Reverse
• Digital Trim: -20 to 60dB
• Delay: >1 Sec (Coarse & Fine control)
• DiGiTuBe: Drive 0.01 – 50.0
  Bias 0 – 6
• LPF: 20 – 20kHz 24dB / Oct
• HPF: 20 – 20kHz 24dB / Oct
• Insert A: (Pre EQ/Dyn) On/Off

• Equalisation: 4 Band Parametric or Dynamic
  : Parametric Only
  (Low/Lowshelf Lower-Mid/Lowshelf Upper-Mid/Hi Shelf Hi/Hishelf)
  On/Off
  Freq; 20 – 20kHz
  Gain; /- 18dB
  Q: 0.1 -20 (Parametric) / 0.10-0.85 (Shelf)
  Dynamic EQ On/Off
  Over/Under
  Band On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1

• Dynamics 1: Single or Multiband (3-band)
  Compressor: On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
  Gain; 0 to 40dB
  with Autogain Option
  Link; Any Channel / Buss
  Hi Crossover; 20Hz – 20kHz
  Lo Crossover; 20Hz – 20kHz
  Knee : Hard Med Soft
  De-Esser: Threshold: 20us – 20ms
  Release: 1ms – 100ms
  Ratio: 1:1 – 50:1
  Ess-Band: Listen On/Off
  Ess-Band Filter Freq/Width: 20Hz – 20kHz

• Dynamics 2: On/Off
  Gate / Ducker: Threshold; -60 – 0dB
  Attack; 50us – 100ms
  Hold; 2ms – 2s
  Release; 5ms – 5s
  Range; 0 – 90dB
  Key; Any Source
  Key Listen
  Freq/Width; 20 – 20kHz
  Compressor: On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
  Gain; 0 to 40dB
  with Autogain Option
  Link; Any Channel/Buss
  Hi Crossover; 20Hz – 20kHz
  Lo Crossover; 20Hz – 20kHz
  S/C Source : Any source
  S/C Listen : On/Off
  S/C Filter Freq/Width: 20Hz – 20kHz

• Insert B: (Post EQ/Dyn) On/Off
• EQ/Dyn Order: EQ/Dyn or Dyn/EQ
• Mute: Channel Mute / Hard Mute
• Solo: Solo Buss 1 / Solo Buss 2 / Both Auto Solo
• Channel Safe: Trim EQ Dyn Fade/Mute Inserts Outputs Full Safe
• Output Routing: Outputs Insert A Insert B FX
• Fader: 100mm Motorised Fader ∞ to 10dB