ดิจิตอลมิกเซอร์ DIGICO SD10 Worksurface Digital Mixer

สเปคสินค้า

Specifications

General Specifications

• Faders 37 x 100mm Touch-Sensitive Motorised (25 on SD10T-24)
• Screens 1 x 15” (38cm) LCD High – Resolution Touch Screen
• Meters 38 x 20-Segment LED Bargraph (26 on SD10T-24)
• Input Channels 132
• Busses 56 assignable that can be configured as groups / auxiliary busses LR or LCR Master
• Solo Busses 2 Stereo Busses
• Matrix 24 x 24 Matrix (Additional to Busses Above)
• Control Groups 24 Selectable for VCA-style Moving Fader Mute Group
• Graphic EQ 24 x 32-band Gain /- 12dB
• Internal FX 24 Stereo FX Processors
• Local I/O 8 x Mic/Line I/O 8 x AES/EBU  I/O (Mono)
• MADI Interface 2 Redundant Interfaces 75 Ohm BNC Connectivity
• Standard Optics
• MIDI Interface In / Out / Thru
• VGA Port DB-15 Mini-Female (1024 x 768 Resolution)
• USB Ports (3) USB 2
• Light Connection (2) XLR3 1.2 – 12V
• Ext Sync Word Clock AES MADI Optics
• Headphone TRS Unbalanced / 8-600 Ohms 1/4 Inch Jack
• SD10 Dimensions 1398mm (w) x 818mm (d) x 285mm (h)
• SD10 Weight 60Kg/132lbs (175Kg/385.80lbs with Optional Flightcase)
• SD10 Flightcase  1586mm (w) x 1158mm (h) x 504mm (d) Weight 115Kg/253.53lbs (Optional)
• SD10 Power Requirements 90-264 VAC 47-63Hz Auto Sensing.235 watts

Audio Specification

• Sample Rate: 48kHz 44.1kHz or 96kHz
• Processing Delay: 2ms Typical @ 48k(60 Stereo Channels Stage Input Through L-R Buss to Stage Output) 1.1ms @96k
• Internal Processing: Up to 40-bit Floating Point
• A>D & D>A: 24-bit Converter Bit Depth
• Frequency Response: /- 0.6dB (20Hz – 20kHz)
• THD: <0.05% @ Unity Gain: 10dB Input @ 1kHz
• Channel Seperation: Better Than 90dB: (40Hz – 15kHz)
• Residual Output: <90dBu Typical
• Noise: (20Hz – 20kHz)
• Microphone Input: Better Than -126dB: Equivalent Noise
• Maximum Output Level: 22dBu
• Maximum Input Level: 22dBu

Processing Channel Specification
Input Channel

• Name: User-Defined / Presets
• Channel Selection: Mono / Stereo / Multi
• Input Routing: Main & Alternate Input
• Analogue Gain: -20 to 60dB
• Phase: Normal / Reverse
• Digital Trim: -40 to 40dB
• Delay: >1 Sec (Coarse & Fine Control)
• DiGiTuBe: Drive 0.01 – 50.0
• Bias 0 – 6
• LPF: 20 – 20kHz 24dB/Oct
• HPF: 20 – 20kHz 24dB/Oct
• Insert A: (Pre EQ/Dyn) On/Off

• Equalisation: 4 Band EQ: Parametric or Dynamic (Low/Lowshelf Lower-Mid/Lowshelf Upper-Mid/
  Hi Shelf Hi/Hishelf)
  On/Off
  Freq; 20 – 20kHz
  Gain; /- 18dB
  Q: 0.1 -20 (Parametric) / 0.10-0.85 (Shelf)
  Dynamic EQ On/Off
  Over/Under
  Band On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1

• Dynamics 1: Single or Multiband (3-Band)
  Compressor: On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
  Gain; 0 to 40dB with
  Autogain Option
  Link; Any Channel/Buss
  Hi Crossover; 20Hz – 20kHz
  Lo Crossover; 20Hz – 20kHz
  Knee : Hard Med Soft
  De-Esser: Threshold : 20us – 20ms
  Release : 1ms – 100ms
  Ratio : 1:1 – 50:1
  Ess-Band : Listen On/Off
  Ess-Band Filter Freq / Width: 20Hz – 20kHz

• Dynamics 2: On/Off
  Gate / Ducker: Threshold; -60 – 0dB
  Attack; 50us – 100ms
  Hold; 2ms – 2s
  Release; 5ms – 5s
  Range; 0 – 90dB
  Key; Any Source
  Key Listen
  Freq/Width; 20 – 20kHz
  Compressor: On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
  Gain; 0 to 40dB with
  Autogain Option
  Link; Any Channel / Buss
  Hi Crossover; 20Hz – 20kHz
  Lo Crossover; 20Hz – 20kHz
  S/C Source : Any Source
  S/C Listen : On/Off
  S/C Filter Freq/Width: 20Hz – 20kHz

• Insert B: (Post EQ/Dyn) On/Off
• EQ/Dyn order: EQ/Dyn or Dyn/EQ
• Mute: Channel Mute / Hard Mute
• Solo: Solo Buss 1 / Solo Buss 2 / Both Auto Solo
• Channel Safe: Input EQ Dyn Aux Pan Fade/Mute Inserts Buss Directs
  Full Safe
• Output Routing: Buss Insert A Insert B FX
  Direct: On/Off Pre-Mute / Pre-Fade / Post-Fade Level /- 18dB
• Fader: 100mm Motorised Fader ∞ to 10dB

Processing Channel Specification
Aux / Group / Matrix Output

• Name: User-Defined / Presets
• Phase: Normal / Reverse
• Digital Trim: -20 to 60dB
• Delay: >1 Sec (Coarse & Fine control)
• DiGiTuBe: Drive 0.01 – 50.0
  Bias 0 – 6
• LPF: 20 – 20kHz 24dB / Oct
• HPF: 20 – 20kHz 24dB / Oct
• Insert A: (Pre EQ/Dyn) On/Off

• Equalisation: 8 Band EQ: 4 band Parametric and 4 band parametric or Dynamic (Low/Lowshelf Lower-Mid/Lowshelf Upper-Mid/Hi Shelf Hi/Hishelf)
  On/Off
  Freq; 20 – 20kHz
  Gain; /- 18dB
  Q: 0.1 -20 (Parametric) / 0.10-0.85 (Shelf)
  Dynamic EQ On/Off
  Over/Under
  Band On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1

• Dynamics 1: Single or Multiband (3-band)
  Compressor: On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
  Gain; 0 to 40dB
  with Autogain Option
  Link; Any Channel / Buss
  Hi Crossover; 20Hz – 20kHz
  Lo Crossover; 20Hz – 20kHz
  Knee : Hard Med Soft
  De-Esser: Threshold: 20us – 20ms
  Release: 1ms – 100ms
  Ratio: 1:1 – 50:1
  Ess-Band: Listen On/Off
  Ess-Band Filter Freq/Width: 20Hz – 20kHz

• Dynamics 2: On/Off
  Gate / Ducker: Threshold; -60 – 0dB
  Attack; 50us – 100ms
  Hold; 2ms – 2s
  Release; 5ms – 5s
  Range; 0 – 90dB
  Key; Any Source
  Key Listen
  Freq/Width; 20 – 20kHz
  Compressor: On/Off
  Threshold; -60 – 0dB
  Attack; 500us – 100ms
  Release; 10ms – 10s
  Ratio; 1:1 – 50:1
  Gain; 0 to 40dB
  with Autogain Option
  Link; Any Channel/Buss
  Hi Crossover; 20Hz – 20kHz
  Lo Crossover; 20Hz – 20kHz
  S/C Source : Any source
  S/C Listen : On/Off
  S/C Filter Freq/Width: 20Hz – 20kHz

• Insert B: (Post EQ/Dyn) On/Off
• EQ/Dyn Order: EQ/Dyn or Dyn/EQ
• Mute: Channel Mute / Hard Mute
• Solo: Solo Buss 1 / Solo Buss 2 / Both Auto Solo
• Channel Safe: Trim EQ Dyn Fade/Mute Inserts Outputs Full Safe
• Output Routing: Outputs Insert A Insert B FX
• Fader: 100mm Motorised Fader ∞ to 10dB