Sale 37%

CROWN XTI 4002 เพาเวอร์แอมป์ 650 วัตต์ 2 ชาแนล

CROWN XTi 4002  เพาเวอร์แอมป์สำหรับงานเครื่องเสียงกลางแจ้ง ชนิด 2 ชาแนล มีกำลังขับ 1200 วัตต์ x 2 ชาแนล ที่ 4 โอหม์ และ 650 วัตต์ x 2 ชาแนล ที่ 8 โอหม์ ตอบสนองความถี่ 20Hz-20kHz

79,800฿ 49,900฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม

[ กรุณาโทรสอบถามสต๊อกสินค้าก่อนทำการสั่งซื้อ ]

สั่งซื้อผ่านไลน์ @siamsoundstore
หมวดหมู่: , , ป้ายกำกับ: Brand: CROWN

คำอธิบาย

CROWN XTI 4002 เพาเวอร์แอมป์ 650 วัตต์ 2 ชาแนล

CROWN XTI 4002 เพาเวอร์แอมป์ 650 วัตต์ 2 ชาแนล

คุณสมบัติ

  • Stereo Wattage: 1600W @ 2 ohms 1200W @ 4 ohms 650W @ 8 ohms
  • Bridged Mono Wattage: 2400W @ 8 ohms 3200W @ 4 ohms
  • Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold attack and release
  • Enhanced Subharmonic Synth section provides user control over frequency gain and filter type for system-specific tuning
  • 3 User-defined fan mode controls – normal early and fullspeed – for matching fan performance to a specific application
  • New system monitoring provides software visibility of AC line voltage and power supply temperature
  • Integrated cast-aluminum handles for easy handling and enhanced durability
  • Locking power cord clip provides a secure connection between the amplifier and power cord
  • Updated HiQnet Band Manager and System Architect control software
  • Increased number of presets to a total of 30; 29 of which are user definable

ดูสินค้ายี่ห้อ CROWN ทั้งหมด

ดูสินค้าประเภทเพาเวอร์แอมป์ทั้งหมด

สเปคสินค้า

Specifications

Output Power 1600W @ 2 Ohms Stereo (per Channel)

1200W @ 4 Ohms Stereo (per Channel)

650W @ 8 Ohms Stereo (per Channel)

3200W @ 4 Ohms Bridged-Mono

2400W @ 8 Ohms Bridged-Mono

Damping Factor 20Hz to 1kHz > 500
Input Sensitivity 1.4Vrms
Input Impedance 20k Ohms (Balanced)

10 kOhms (Unbalanced)

Gain 32.9dB @ 1kHz 8 Ohm Rated Output
Frequency Response (at 1 watt 20Hz – 20kHz) 0dB -1dB
Signal-to-Noise Ratio XTi1002/2002/4002: 100dB (A weighted)

XTi6002: 103dB (A weighted)

Total Harmonic Distortion (THD) < 0.5%
Connections Input Connectors: XLR one per channel

Link/Out Connector: Loop-thru signal from input connector for linking another amplifier one per channel.

Output Connectors: Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon connectors).

HiQnet USB Connector: Type B connects to HiQnet network.

Controls Front Panel Level: Two front-panel rotary level controls one for each channel

Power Switch: On/Off switch applies AC power to the amplifier

Sel/Prev/Next Buttons: Three buttons near the LCD screen that are used to access menu items and front panel lockout

LCD Screen: Backlit liquid crystal display that shows preset and processing status

Indicators Signal Indicator: Green LED one per channel illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs).

-10 Indicator: Green LED flashes when output signal exceeds -10 dB below clip.-20 Indicator: Green LED flashes when output signal level exceeds -20 dB below clip

Ready Indicator: Green LED one per channel illuminates when the amplifier is ready to produce audio.

Clip Indicator: Red LED one per channel turns on at the threshold of audible distortion

Temp Indicator: Red LED one per channel illuminates under excessive temperature conditions

Power Indicator: Blue LED illuminates when the amplifier has been turned on and has power

Cooling Proportional speed fan with front-to-rear airflow.
Power Consumption 10.5A; no more than 38W at idle
Power Requirements 100 VAC 120 VAC 220-240 VAC 50/60 Hz
Dimensions 19 x 3.5 x 12.25″ (48.26 x 8.89 x 31.11cm)
Weight 18.5 lbs (8.4kg)
Specialties DSP Includes EQ Crossover Filters Delay and Subharmonic Synthesizer

Protection for Short Circuits Overloads and Overheating

Packaging Info
Package Weight 23.75 lb
Box Dimensions (LxWxH) 22.5 x 19.0 x 6.7″

ดาวน์โหลด

CROWN XTI 4002 DATASHEET

วิดีโอ

Login

X