Sale 39%

CROWN XTI 1002 เพาเวอร์แอมป์ 275 วัตต์ 2 ชาแนล

CROWN XTi 1002  เพาเวอร์แอมป์สำหรับงานเครื่องเสียงกลางแจ้ง ชนิด 2 ชาแนล มีกำลังขับ 500 วัตต์ x 2 ชาแนล ที่ 4 โอหม์ และ 275 วัตต์ x 2 ชาแนล ที่ 8 โอหม์ ตอบสนองความถี่ 20Hz-20kHz



[ กรุณาโทรสอบถามสต๊อกสินค้าก่อนทำการสั่งซื้อ ]

สั่งซื้อผ่านไลน์ @siamsoundstore
หมวดหมู่: , , ป้ายกำกับ:


CROWN XTI 1002 เพาเวอร์แอมป์ 275 วัตต์ 2 ชาแนล

CROWN XTI 1002 เพาเวอร์แอมป์ 275 วัตต์ 2 ชาแนล


  • Stereo Wattage: 700W @ 2 ohms 500W @ 4 ohms 275W @ 8 ohms
  • Bridged Mono Wattage: 1000W @ 8 ohms 1400W @ 4 ohms
  • Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold attack and release
  • Enhanced Subharmonic Synth section provides user control over frequency gain and filter type for system-specific tuning
  • 3 User-defined fan mode controls – normal early and fullspeed – for matching fan performance to a specific application
  • New system monitoring provides software visibility of AC line voltage and power supply temperature
  • Integrated cast-aluminum handles for easy handling and enhanced durability
  • Locking power cord clip provides a secure connection between the amplifier and power cord
  • Updated HiQnet Band Manager and System Architect control software

ดูสินค้ายี่ห้อ CROWN ทั้งหมด




Output Power 700W @ 2 Ohms Stereo (per Channel)

500W @ 4 Ohms Stereo (per Channel)

275W @ 8 Ohms Stereo (per Channel)

1400W @ 4 Ohms Bridged-Mono

1000W @ 8 Ohms Bridged-Mono

Damping Factor 20Hz to 1kHz > 500
Input Sensitivity 1.4Vrms
Input Impedance 20k Ohms (Balanced)

10 kOhms (Unbalanced)

Gain 32.9dB @ 1kHz 8 Ohm Rated Output
Frequency Response (at 1 watt 20Hz – 20kHz) 0dB -1dB
Signal-to-Noise Ratio XTi1002/2002/4002: 100dB (A weighted)

XTi6002: 103dB (A weighted)

Total Harmonic Distortion (THD) < 0.5%
Connections Input Connectors: XLR one per channel

Link/Out Connector: Loop-thru signal from input connector for linking another amplifier one per channel.

Output Connectors: Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon connectors).

HiQnet USB Connector: Type B connects to HiQnet network.

Controls Front Panel Level: Two front-panel rotary level controls one for each channel

Power Switch: On/Off switch applies AC power to the amplifier

Sel/Prev/Next Buttons: Three buttons near the LCD screen that are used to access menu items and front panel lockout

LCD Screen: Backlit liquid crystal display that shows preset and processing status

Indicators Signal Indicator: Green LED one per channel illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs).

-10 Indicator: Green LED flashes when output signal exceeds -10 dB below clip.-20 Indicator: Green LED flashes when output signal level exceeds -20 dB below clip

Ready Indicator: Green LED one per channel illuminates when the amplifier is ready to produce audio.

Clip Indicator: Red LED one per channel turns on at the threshold of audible distortion

Temp Indicator: Red LED one per channel illuminates under excessive temperature conditions

Power Indicator: Blue LED illuminates when the amplifier has been turned on and has power

Cooling Proportional speed fan with front-to-rear airflow.
Power Consumption 6.8A; no more than 38W at idle
Power Requirements 100 VAC 120 VAC 220-240 VAC 50/60 Hz
Dimensions 19 x 3.5 x 12.25″ (48.26 x 8.89 x 31.11cm)
Weight 18.5 lbs (8.4kg)
Specialties DSP Includes EQ Crossover Filters Delay and Subharmonic Synthesizer

Protection for Short Circuits Overloads and Overheating

Packaging Info
Package Weight 22.0 lb
Box Dimensions (LxWxH) 22.5 x 19.0 x 7.0″