GENELEC 1032C SAM Studio Monitor ลำโพงมอนิเตอร์ห้องอัด 10 นิ้ว ทวีตเตอร์โดมโลหะขนาด 1 นิ้ว ให้เสียงระดับมืออาชีพ
114,000฿
ดูสินค้าลำโพงสตูดิโอมอนิเตอร์ทุกรุ่น
| Cut-Off Frequency | Lower: < 33 Hz at -6 dB |
| Upper: > 23 kHz at -6 dB | |
| Frequency Response | 40 Hz to 20 kHz (±2.5 dB) |
| SPL | SPL (Max Short Term): ≥ 114 dB (short term sine wave acoustic output on axis in half space, averaged from 100 Hz to 3 kHz at 3.3′ / 1 m)SPL (Max Long Term): 104 dB SPL maximum (long-term RMS acoustic output in the same conditions with IEC weighted noise (limited by driver protection circuit) at 3.3′ / 1 m) |
| Peak Output Capacity | 124 db maximum peak acoustic output (per pair in listening room with with music material at 3.3′ / 1 m) |
| Self-Generated Noise Level | ≤ 5 dB, in free space at 3.3′ / 1 m on axis (A-weighted) |
| Harmonic Distortion | < 1% (at 85 dB SPL at 3.3′ / 1 m on axis, 50 to 100 Hz) |
| < 0.5% (at 85 dB SPL at 3.3′ / 1 m on axis, > 100 Hz) | |
| Drivers | Bass: dual 9.8″ / 250 cone |
| Treble: 1.0″ / 25 mm metal dome | |
| Amplifier | Bass Amplifier Short-Term Output Power: 200 W |
| Treble Amplifier Short-Term Output Power: 150 W(Long-term output power is limited by driver protection circuitry) | |
| THD | < 0.05% at nominal output |
| Digital Connections | AES/EBU Input: XLR female, 110 Ohms |
| AES/EBU Thru/Output: XLR male, 110 Ohms | |
| Sample Rate and Resolution | 32 to 192 kHz / 16- to 24-bit |
| Digital Input | Sensitivity: -30 dBFS |
| Gain Sensitivity: Adjustable from +6 to -6 dBu via rotary control | |
| Network | Type: GLM (proprietary) |
| Connection: 2 x RJ45 | |
| Crossover Frequencies | 1.8 kHz |
| Digital Controls | GLM Software Frequency Response Adjustment |
| Parametric Notch Filters: 16x | |
| Shelving Filters: 2 x LF and 2 x HF | |
| System Room Response Calibration: Genelec GLM AutoCal, GLM manual, Standalone | |
| Mains Voltage | 100 to 240 VAC 50/60 Hz |
| Power Consumption | ISS Active: < 1 W |
| Idle: 11 W | |
| Full Output (Short Term): 200 W | |
| Analog Input | XLR female, balanced 10 kOhm (pin 1: ground, pin 2: non-inverting, pin 3: inverting) |
| Input Impedance | 10 kOhms |
| Analog Input | Maximum Analog Input Level: +25.0 dBu |
| Analog Input Sensitivity: -6 dBu (100 dB SPL at 3.3′ / 1 m) | |
| Analog Input Sensitivity: Adjustable from +6 to -6 dBu via rotary control | |
| Dimensions (H x W x D) | 19.5 x 12.6 x 11.4″ / 495.0 x 320.0 x 290.0 mm |
| Weight | 37.5 lb / 17.0 kg |
| Packaging Info | |
| Package Weight | 44.4 lb |
| Box Dimensions (LxWxH) |
26.0 x 17.0 x 17.0″ |
