LAB GRUPPEN C48:4 เพาเวอร์แอมป์ 4 แชนแนล 1000 วัตต์

LABGRUPPEN.LOGO

LAB GRUPPEN C48:4 เป็นแอมป์แบบ 4 แชแนล มีกำลังขับ 1000 วัตต์ ที่ 8 และ  1200 วัตต์ 4 ohms กินไฟน้อย ประหยัดพลังงาน มาตรฐานสากล

 

182,000฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม

[ กรุณาโทรสอบถามสต๊อกสินค้าก่อนทำการสั่งซื้อ ]

สั่งซื้อผ่านไลน์ @siamsoundstore
หมวดหมู่: , , ป้ายกำกับ: Brand: LAB.GRUPPEN

รายละเอียดเพิ่มเติม

LAB GRUPPEN C48:4 เพาเวอร์แอมป์ 4 แชนแนล 1000 วัตต์

LAB GRUPPEN C48:4 เพาเวอร์แอมป์ 4 แชนแนล 1000 วัตต์

  • Unprecedented power density – Total output of 4800 W (4 ohms) in a 2U cabinet
  • Four channels – All channels bridgeable for 2- or 3-channel configurations
  • Lo-Z or Hi-Z (70 V / 100 V) – Selectable per channel normal or bridged
  • Patented Class TD® amplifier topology
  • Voltage Peak Limiter (VPL) – Configurable per channel to optimize each output for connected loads
  • Phoenix-type input connectors
  • Screw terminal output connectors
  • Comprehensive protection and warning – Excessive output current DC high temperature very high frequency (VHF) short circuit open load mains fuse protection and soft start
  • Efficient and uniform Intercooler® cooling
  • NomadLink® network ready

ดูสินค้ายี่ห้อ LAB GRUPPEN ทั้งหมด

ดูสินค้าประเภทเพาเวอร์แอมป์ทั้งหมด

สเปคสินค้า

Specifications

Model C Series 48:4
General
Number of amplifier channels 4
Peak total output all channels driven 4800 W
Peak output voltage per channel 141 V
Max output current per channel 17.5 Arms
Max output power (all channels driven)
16 ohms 625 W
8 ohms 1000 W
4 ohms 1200 W
2 ohms 600 W
Hi-Z per ch. (all ch.’s driven): 70 Vrms / 100 V peak 1100 W
Max output power bridged
16 ohms 2000 W
8 ohms 2400 W
4 ohms 1200 W
2 ohms Not recommended 1
Bridged per ch.: 140 Vrms / 200 V peak 1800 W
Performance
THD 20 Hz – 20 kHz at 1 W <0.1%
THD at 1 kHz and 1 dB below clipping <0.05%
Signal to Noise Ratio >112 dBA
Channel separation (Crosstalk) at 1 kHz >70 dB
Frequency response (1 W into 8 ohms) 0 / -3 dB 6.8 Hz – 34 kHz
Input impedance 20 kOhm
Common Mode Rejection (CMR) >50 dB 20 Hz – 20 kHz
Output impedance @ 100 Hz 30 mOhm
Gain Sensitivity and Limiters
VPL selectable per ch 2 141 118 100 85 71 59 50 42 V
VPL when bridged 2 3 282 236 200 170 142 118 100 84 V
Voltage Peak Limiter mode (per ch.) Hard / Soft
Amplifier gain selectable (all channels) – rear-panel switches 3 23 26 29 32 35 38 41 44 dB
Default gain 35 dB
Level adjustment (per channel) Front-panel potentiometer 21 position detented from -inf to
Connectors and Buttons
Input connectors (per ch.) 3-pin Phoenix electronically balanced
Output connectors (per ch.) Barrier strip 2-pole screw terminals
Output bridge mode A B and/or C D inputs A and C are input source
NomadLink network On board 2 x RJ45 connectors IN and OUT
Intelligent fans (on/off) Yes depending on presence of output signal
Power Individual switches on front panel
Cooling Two fans front-rear airflow temperature controlled speed
Front-panel user interface
Common NomadLink Network; Power Average Limiter (PAL)5; Power on
Per channel Signal present / High-impedance; -10 dB and -4 dB output signal;Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute
Power
Operating voltage 230 V / 115 V nominal 130-265 V / 65 -135 V 4
Minimum power-up voltage 230 V / 115 V 171 V / 85 V
Power Average Limiter (PAL) 5 Yes
Power Factor Correction (PFC) No
Soft-start / Inrush Current Draw Yes / max. 5 A
Mains connector 230 V CE: 16 A CEE7; 115 V ETL: 20 A / NEMA 5-20P; C16:4: 15A/NEMA 5-15P
Dimensions
Dimensions W: 483 mm (19”) H: 88 mm (2 U) D: 343 mm (13.5”)
Weight
Weight 12 kg (26.4 lbs)
Finish
Finish Black painted steel chassis with gray painted steel front
Approvals
Approvals CE ANSI/UL 60065 (ETL) CSA C22.2 NO. 60065 FCC

ดาวน์โหลด

LAB GRUPPEN C48:4 DATASHEET

Login

X